Dissertation/ Thesis
Diseño e implementación de un sistema de medida inalámbrico del ECG para la monitorización no invasiva de parámetros cardiovasculares en pilotos de avión
| Τίτλος: | Diseño e implementación de un sistema de medida inalámbrico del ECG para la monitorización no invasiva de parámetros cardiovasculares en pilotos de avión |
|---|---|
| Συγγραφείς: | Vales Ramos, Alex |
| Συνεισφορές: | Universitat Politècnica de Catalunya. Enginyeria Electrònica, Casanella Alonso, Ramón |
| Στοιχεία εκδότη: | Universitat Politècnica de Catalunya |
| Έτος έκδοσης: | 2020 |
| Συλλογή: | Universitat Politècnica de Catalunya, BarcelonaTech: UPCommons - Global access to UPC knowledge |
| Θεματικοί όροι: | Àrees temàtiques de la UPC::Enginyeria electrònica, Biomedical engineering, Arduino (Programmable controller)--Programming, Wireless, Instrumentació Biomèdica, Recerca, ECG, LabView, Arduino, Arduino (Controlador programable), Instrumentació -- Sensors, Enginyeria biomèdica -- Aparells i instruments |
| Περιγραφή: | The present project has the purpose of developing a low-cost sensor system capable of monitoring cardiac parameters of an individual; and in order to achieve this goal, both hardware and software have been combined. About the hardware part, a heart rate sensor has been used, which by means of two electrodes connected to an individual is capable of capturing the ECG signal, this signal is transmitted to an Arduino MKR Wifi 1010 board that performs as a link between the sensor and the pc, receiving the ECG signal from the sensor and transmitting it to the pc. About the software part, Arduino programming in smaller proportion, and LabView mainly, have been combined. Using Arduino language, the necessary code has been developed so that the board is able to send the ECG signal captured by the sensor to the pc. In addition, with this code and taking advantage of the characteristics of the board used, it has been obtained that the system is able to transmit both by serial port or by Wifi using the Udp protocol, thus making the system completely wireless, and powered only by a battery. About the programming part in LabView, it has been used to carry out the entire processing and filtering of the ECG signal sent by the Arduino board to the pc. An application with an interface with different functionalities available to the user has been developed, such as the graphic display of the ECG signal, heart rate, period and maximum and minimum of the graph. ; El presente proyecto tiene la finalidad de desarrollar un sistema sensor de bajo coste capaz de monitorizar parámetros cardíacos de un individuo; y para conseguir tal objetivo, se ha combinado tanto parte hardware como parte software. En la parte hardware se ha utilizado un sensor de frecuencia cardíaca que mediante dos electrodos conectados a un individuo es capaz de captar la señal ECG, esta señal es transmitida a una placa Arduino MKR Wifi 1010 que actúa de enlace entre el sensor y el pc, recibiendo la señal ECG del sensor y transmitiéndola al pc. En la parte de software ... |
| Τύπος εγγράφου: | bachelor thesis |
| Περιγραφή αρχείου: | application/pdf |
| Γλώσσα: | Spanish; Castilian |
| Relation: | https://hdl.handle.net/2117/327638 |
| Διαθεσιμότητα: | https://hdl.handle.net/2117/327638 |
| Rights: | http://creativecommons.org/licenses/by-sa/3.0/es/ ; Open Access |
| Αριθμός Καταχώρησης: | edsbas.12BA3DD4 |
| Βάση Δεδομένων: | BASE |
καταχωρήστε σχόλιο πρώτοι!