| Description: |
В настоящей статье изложены результаты электрохимического растворения Sn-Pb сплава в электролитах на основе сульфаминовой кислоты, проводимого в гальваностатическом режиме при различных значениях плотностей тока. Показано, что в диапазоне исследуемых плотностей тока 0,10-0,25 А/см2 скорость растворения сплава зависит от состава электролита – добавка азотной кислоты увеличивает скорость растворения в 1,8 раза, снижение концентрации сульфаминовой кислоты в 2 раза ведет к снижению скорости растворения в 1,3 раза. Установлено, что в при проведении процесса электрохимического растворения Sn-Pb сплава в гальваностатическом режиме при плотностях тока 0,10-0,25 А/см2 катодный осадок имеет состав (масс.% ): свинец – 99,4-99,6; олово – 0,4-0,6. This article presents the results of electrochemical dissolution of Sn-Pb alloy in electrolytes based on sulfamic acid, conducted in galvanostatic mode at different values of current densities. It is shown that in the range of the studied current densities of 0,10-0,25 A/cm2, the dissolution rate of the alloy depends on the composition of the electrolyte – the addition of nitric acid increases the dissolution rate by 1,8 times, a decrease in the concentration of sulfamic acid by 2 times leads to a decrease in the dissolution rate by 1,3 times. It was found that during the electrochemical dissolution of the Sn-Pb alloy in galvanostatic mode at current densities of 0,10-0,25 A/cm2, the cathode precipitate has the composition (mass%): lead – 99,4-99,6; tin – 0,4-0,6. |