Report
МОДЕРНИЗАЦИЯ ЗВЕЗДООБРАЗНОЙ КРОМКИ КОЛЛИМАТОРА МАРК-12
| Τίτλος: | МОДЕРНИЗАЦИЯ ЗВЕЗДООБРАЗНОЙ КРОМКИ КОЛЛИМАТОРА МАРК-12 |
|---|---|
| Στοιχεία εκδότη: | Современная электродинамика, 2023. |
| Έτος έκδοσης: | 2023 |
| Θεματικοί όροι: | КОМПАКТНЫЙ ПОЛИГОН, КОЛЛИМАТОР, РАСПРЕДЕЛЕНИЕ ПОЛЯ, ЗВЕЗДООБРАЗНАЯ КРОМКА, РАБОЧАЯ ЗОНА |
| Περιγραφή: | The problem of optimizing the serrated edge of the collimator MARK-12 is considered. The serrated or rolled edge of the mirror is used to reduce the influence of diffraction effects on the field distribution in the quiet zone of the collimator. Currently, teeth with curved edges have been widely introduced, which, at the same height, provide a more uniform distribution of the field in the quiet zone of a compact ranges. Using model of the two-dimensional collimator, the shape of the tooth profile was found by iteration, which provides the best smoothness of the field distribution in the quiet zone. The calculation of the diffraction problem was performed by the method of integral equations. It was shown that the field distributions in the model problem strongly depend on the polarization of the incident wave for both serrations with rectilinear and curved edges. Then a number of options for the arrangement of serrations with an optimized shape of the edges on the edge of the parabolic part of the collimator MARK-12 were considered. The physical optics method was used to evaluate the distribution of fields in the quiet zone of the collimator. It was shown that the modification of the shape of the serrated edge will reduce the nonuniformity of the field distribution in the quiet zone of the collimator by 0.6 dB in the low-frequency part of the range while maintaining the overall dimensions of the mirror. Рассмотрена задача об оптимизации звездообразной кромки коллиматора МАРК-12. Звездообразная кромка или отогнутый край зеркала используются для того, чтобы уменьшить влияние дифракционных эффектов на распределение поля в рабочей зоне коллиматора. В настоящее время широкое внедрение получили зубцы с криволинейными ребрами, которые при той же высоте обеспечивают более равномерное распределение поля в рабочей зоне компактного полигона. В модельной задаче дифракции на двумерном коллиматоре путем перебора была найдена форма профиля зубцов, обеспечивающая наилучшее распределение поля. Расчет дифракции в модельной задаче выполнялся методом интегральных уравнений. Было отмечено, что распределения полей в модельной задаче сильно зависят от поляризации падающей волны как для зубцов с прямолинейными, так и с криволинейными ребрами. Затем был рассмотрен ряд вариантов расположения зубцов с оптимизированной формой ребер по краю параболической части коллиматора МАРК-12. Методом физической оптики была проведена оценка распределения полей в рабочей зоне коллиматора. Показано, что модификация формы звездообразной кромки позволит уменьшить неравномерность распределения поля в рабочей зоне коллиматора на 0,6 дБ в низкочастотной части диапазона при сохранении габаритных размеров зеркала. |
| Τύπος εγγράφου: | Research |
| DOI: | 10.24412/2949-0553-2023-24-12-16 |
| Rights: | CC BY |
| Αριθμός Καταχώρησης: | edsair.doi...........6a6747b031404d482b91bd7fc6d98c3f |
| Βάση Δεδομένων: | OpenAIRE |
| DOI: | 10.24412/2949-0553-2023-24-12-16 |
|---|