Academic Journal

REGULACIJA TEMPERATURE VODE U KADI ZA PRANJE MASNIH DIJELOVA.

Λεπτομέρειες βιβλιογραφικής εγγραφής
Τίτλος: REGULACIJA TEMPERATURE VODE U KADI ZA PRANJE MASNIH DIJELOVA. (Croatian)
Alternate Title: TEMPERATURE REGULATION IN THE BATH WATER FOR WASHING GREASY PARTS. (English)
Συγγραφείς: Pašić, Muhamed
Πηγή: Technical Journal / Tehnički Glasnik; 2013, Vol. 7 Issue 1, p31-34, 4p
Θεματικοί όροι: PID controllers, Computer software research, Automatic control systems, Accuracy, STEP 7 (Computer program language)
Abstract (English): The paper presents the use of Chien-Hrones-Reswick rules for the adjustment of the PID controller parameters since its usage gives the best results for monitoring regulated sizes. A simulation model was designed in MATLAB using the Chien-Hrones-Reswick rules. A model for an experiment in which the Chien-Hrones-Reswick rules were used has been designed for the presentation of the observed values response. The parameters obtained by this method are the parameters of PID controller programmed in the software package Step 7 Basic. Using the PID controller programmed in such a way, the temperature regulation was performed to the value of 75°C in the bathtub for washing greasy parts. This will enable obtaining default values, a good temperature regulation. In the same way, a different value can be regulated, where a greater precision control is required. [ABSTRACT FROM AUTHOR]
Abstract (Croatian): Prikazana je upotreba Chien-Hrones-Reswick pravila za podešavanje parametara PID regulataora, jer se njegovim korištenjem najbolje prate regulabilne veličine. U programskom paketu Matlab osmišljen je simulacijski model korištenjem Chien-Hrones-Reswick pravila. Napravljen je model za eksperiment u kojem su se koristila Chien-Hrones-Reswick pravila za prikaz odziva promatranih vrijednosti. Parametri dobiveni ovom metodom su parametri PID regulatora programiranog u programskom paketu Step7 Basic. Pomoću tako programiranog PID regulatora provedena je regulacija temperature u kadi za pranje masnih dijelovana vrijednosti od 75°C. Ovim će se dobiti zadane vrijednosti, dobra regulacija temperature. Na isti način se može regulirati neka druga veličina gdje je potrebna puno veća točnost. [ABSTRACT FROM AUTHOR]
Copyright of Technical Journal / Tehnički Glasnik is the property of Polytechnic of Varazdin and its content may not be copied or emailed to multiple sites without the copyright holder's express written permission. Additionally, content may not be used with any artificial intelligence tools or machine learning technologies. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)
Βάση Δεδομένων: Complementary Index
FullText Text:
  Availability: 0
CustomLinks:
  – Url: https://resolver.ebsco.com/c/fiv2js/result?sid=EBSCO:edb&genre=article&issn=18466168&ISBN=&volume=7&issue=1&date=20130301&spage=31&pages=31-34&title=Technical Journal / Tehnički Glasnik&atitle=REGULACIJA%20TEMPERATURE%20VODE%20U%20KADI%20ZA%20PRANJE%20MASNIH%20DIJELOVA.&aulast=Pa%C5%A1i%C4%87%2C%20Muhamed&id=DOI:
    Name: Full Text Finder (for New FTF UI) (ns324271)
    Category: fullText
    Text: Full Text Finder
    MouseOverText: Full Text Finder
Header DbId: edb
DbLabel: Complementary Index
An: 87542089
RelevancyScore: 835
AccessLevel: 6
PubType: Academic Journal
PubTypeId: academicJournal
PreciseRelevancyScore: 834.613586425781
IllustrationInfo
Items – Name: Title
  Label: Title
  Group: Ti
  Data: REGULACIJA TEMPERATURE VODE U KADI ZA PRANJE MASNIH DIJELOVA. (Croatian)
– Name: TitleAlt
  Label: Alternate Title
  Group: TiAlt
  Data: TEMPERATURE REGULATION IN THE BATH WATER FOR WASHING GREASY PARTS. (English)
– Name: Author
  Label: Authors
  Group: Au
  Data: <searchLink fieldCode="AR" term="%22Pašić%2C+Muhamed%22">Pašić, Muhamed</searchLink>
– Name: TitleSource
  Label: Source
  Group: Src
  Data: Technical Journal / Tehnički Glasnik; 2013, Vol. 7 Issue 1, p31-34, 4p
– Name: Subject
  Label: Subject Terms
  Group: Su
  Data: <searchLink fieldCode="DE" term="%22PID+controllers%22">PID controllers</searchLink><br /><searchLink fieldCode="DE" term="%22Computer+software+research%22">Computer software research</searchLink><br /><searchLink fieldCode="DE" term="%22Automatic+control+systems%22">Automatic control systems</searchLink><br /><searchLink fieldCode="DE" term="%22Accuracy%22">Accuracy</searchLink><br /><searchLink fieldCode="DE" term="%22STEP+7+%28Computer+program+language%29%22">STEP 7 (Computer program language)</searchLink>
– Name: AbstractNonEng
  Label: Abstract (English)
  Group: Ab
  Data: The paper presents the use of Chien-Hrones-Reswick rules for the adjustment of the PID controller parameters since its usage gives the best results for monitoring regulated sizes. A simulation model was designed in MATLAB using the Chien-Hrones-Reswick rules. A model for an experiment in which the Chien-Hrones-Reswick rules were used has been designed for the presentation of the observed values response. The parameters obtained by this method are the parameters of PID controller programmed in the software package Step 7 Basic. Using the PID controller programmed in such a way, the temperature regulation was performed to the value of 75°C in the bathtub for washing greasy parts. This will enable obtaining default values, a good temperature regulation. In the same way, a different value can be regulated, where a greater precision control is required. [ABSTRACT FROM AUTHOR]
– Name: AbstractNonEng
  Label: Abstract (Croatian)
  Group: Ab
  Data: Prikazana je upotreba Chien-Hrones-Reswick pravila za podešavanje parametara PID regulataora, jer se njegovim korištenjem najbolje prate regulabilne veličine. U programskom paketu Matlab osmišljen je simulacijski model korištenjem Chien-Hrones-Reswick pravila. Napravljen je model za eksperiment u kojem su se koristila Chien-Hrones-Reswick pravila za prikaz odziva promatranih vrijednosti. Parametri dobiveni ovom metodom su parametri PID regulatora programiranog u programskom paketu Step7 Basic. Pomoću tako programiranog PID regulatora provedena je regulacija temperature u kadi za pranje masnih dijelovana vrijednosti od 75°C. Ovim će se dobiti zadane vrijednosti, dobra regulacija temperature. Na isti način se može regulirati neka druga veličina gdje je potrebna puno veća točnost. [ABSTRACT FROM AUTHOR]
– Name: Abstract
  Label:
  Group: Ab
  Data: <i>Copyright of Technical Journal / Tehnički Glasnik is the property of Polytechnic of Varazdin and its content may not be copied or emailed to multiple sites without the copyright holder's express written permission. Additionally, content may not be used with any artificial intelligence tools or machine learning technologies. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract.</i> (Copyright applies to all Abstracts.)
PLink https://search.ebscohost.com/login.aspx?direct=true&site=eds-live&db=edb&AN=87542089
RecordInfo BibRecord:
  BibEntity:
    Languages:
      – Code: hrv
        Text: Croatian
    PhysicalDescription:
      Pagination:
        PageCount: 4
        StartPage: 31
    Subjects:
      – SubjectFull: PID controllers
        Type: general
      – SubjectFull: Computer software research
        Type: general
      – SubjectFull: Automatic control systems
        Type: general
      – SubjectFull: Accuracy
        Type: general
      – SubjectFull: STEP 7 (Computer program language)
        Type: general
    Titles:
      – TitleFull: REGULACIJA TEMPERATURE VODE U KADI ZA PRANJE MASNIH DIJELOVA.
        Type: main
  BibRelationships:
    HasContributorRelationships:
      – PersonEntity:
          Name:
            NameFull: Pašić, Muhamed
    IsPartOfRelationships:
      – BibEntity:
          Dates:
            – D: 01
              M: 03
              Text: 2013
              Type: published
              Y: 2013
          Identifiers:
            – Type: issn-print
              Value: 18466168
          Numbering:
            – Type: volume
              Value: 7
            – Type: issue
              Value: 1
          Titles:
            – TitleFull: Technical Journal / Tehnički Glasnik
              Type: main
ResultId 1