Academic Journal
某选矿厂旋流器分级工艺优化试验研究.
| Τίτλος: | 某选矿厂旋流器分级工艺优化试验研究. (Chinese) |
|---|---|
| Alternate Title: | Experimental study on optimization of hydrocyclone classification process in a concentrator. (English) |
| Συγγραφείς: | 苑文波, 田 伟, 潘凤娇, 梁树丰 |
| Πηγή: | Gold (1001-1277); sep2026, Vol. 47 Issue 9, p90-95, 6p |
| Θεματικοί όροι: | Separation (Technology), Parameterization, Feed quality, Machine separators, Mathematical optimization |
| Abstract (English): | To address the low classification efficiency of hydrocyclones in a concentrator and overcome the limitations of single-parameter optimization, this study systematically investigated the coupling effects of operating parameters, such as feed flow rate, feed concentration, and feed fineness, and structural parameters, including spigot diameter and vortex finder insertion depth. The effects of each factor on classification efficiency were determined through single-factor experiments, and an L16 (45) orthogonal experimental design was then adopted to investigate the synergistic effects of structural and operating parameters. The results show that the order of influence of each factor on classification efficiency is: feed fineness −38 μm proportion > spigot diameter > feed flow rate > feed concentration > vortex finder insertion depth. The optimal parameter combination is a feed flow rate of 152 m³/h, feed concentration of 39 %, feed fineness of 37 % (−38 μm fraction), spigot diameter of 16 mm, and vortex finder insertion depth of 105 mm, resulting in a hydrocyclone classification efficiency of 66.27 %, which is 22.86 percentage points higher than that of the original process. This research provides a theoretical basis and practical reference for the optimization of grinding and classification processes in similar concentrators. [ABSTRACT FROM AUTHOR] |
| Abstract (Chinese): | 针对某选矿厂旋流器分级效率偏低的问题, 为突破单一参数优化局限, 系统开展了给矿 流量、给矿浓度、给矿细度等操作参数与沉砂嘴直径、溢流管插入深度等结构参数的多场耦合作用 机制研究。通过单因素试验明确了各因素对分级效率的影响规律, 采用 L16 (45) 正交实验设计, 揭示了结构参数与操作参数的协同调控效应。结果表明: 各因素对分级效率影响的顺序为给矿细 度−38 μ m 占比>沉砂嘴直径>给矿流量>给矿浓度>溢流管插入深度, 最优参数组合为给矿流量 152 m³/h 、给矿浓度 39% 、给矿细度−38 μ m 占比 37% 、沉砂嘴直径 16 mm、溢流管插入深度 105 mm, 旋流器分级效率达 66.27%, 较原工艺提升 22.86 百分点。研究成果可为同类选矿厂磨矿分级工艺 优化提供理论依据和实践参考。 [ABSTRACT FROM AUTHOR] |
| Copyright of Gold (1001-1277) is the property of Gold Magazine Editorial Office and its content may not be copied or emailed to multiple sites without the copyright holder's express written permission. Additionally, content may not be used with any artificial intelligence tools or machine learning technologies. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.) | |
| Βάση Δεδομένων: | Complementary Index |
| FullText | Text: Availability: 0 |
|---|---|
| Header | DbId: edb DbLabel: Complementary Index An: 197205506 RelevancyScore: 1082 AccessLevel: 6 PubType: Academic Journal PubTypeId: academicJournal PreciseRelevancyScore: 1082.42749023438 |
| IllustrationInfo | |
| Items | – Name: Title Label: Title Group: Ti Data: 某选矿厂旋流器分级工艺优化试验研究. (Chinese) – Name: TitleAlt Label: Alternate Title Group: TiAlt Data: Experimental study on optimization of hydrocyclone classification process in a concentrator. (English) – Name: Author Label: Authors Group: Au Data: <searchLink fieldCode="AR" term="%22苑文波%22">苑文波</searchLink><br /><searchLink fieldCode="AR" term="%22田+伟%22">田 伟</searchLink><br /><searchLink fieldCode="AR" term="%22潘凤娇%22">潘凤娇</searchLink><br /><searchLink fieldCode="AR" term="%22梁树丰%22">梁树丰</searchLink> – Name: TitleSource Label: Source Group: Src Data: Gold (1001-1277); sep2026, Vol. 47 Issue 9, p90-95, 6p – Name: Subject Label: Subject Terms Group: Su Data: <searchLink fieldCode="DE" term="%22Separation+%28Technology%29%22">Separation (Technology)</searchLink><br /><searchLink fieldCode="DE" term="%22Parameterization%22">Parameterization</searchLink><br /><searchLink fieldCode="DE" term="%22Feed+quality%22">Feed quality</searchLink><br /><searchLink fieldCode="DE" term="%22Machine+separators%22">Machine separators</searchLink><br /><searchLink fieldCode="DE" term="%22Mathematical+optimization%22">Mathematical optimization</searchLink> – Name: AbstractNonEng Label: Abstract (English) Group: Ab Data: To address the low classification efficiency of hydrocyclones in a concentrator and overcome the limitations of single-parameter optimization, this study systematically investigated the coupling effects of operating parameters, such as feed flow rate, feed concentration, and feed fineness, and structural parameters, including spigot diameter and vortex finder insertion depth. The effects of each factor on classification efficiency were determined through single-factor experiments, and an L16 (4<superscript>5</superscript>) orthogonal experimental design was then adopted to investigate the synergistic effects of structural and operating parameters. The results show that the order of influence of each factor on classification efficiency is: feed fineness −38 μm proportion > spigot diameter > feed flow rate > feed concentration > vortex finder insertion depth. The optimal parameter combination is a feed flow rate of 152 m³/h, feed concentration of 39 %, feed fineness of 37 % (−38 μm fraction), spigot diameter of 16 mm, and vortex finder insertion depth of 105 mm, resulting in a hydrocyclone classification efficiency of 66.27 %, which is 22.86 percentage points higher than that of the original process. This research provides a theoretical basis and practical reference for the optimization of grinding and classification processes in similar concentrators. [ABSTRACT FROM AUTHOR] – Name: AbstractNonEng Label: Abstract (Chinese) Group: Ab Data: 针对某选矿厂旋流器分级效率偏低的问题, 为突破单一参数优化局限, 系统开展了给矿 流量、给矿浓度、给矿细度等操作参数与沉砂嘴直径、溢流管插入深度等结构参数的多场耦合作用 机制研究。通过单因素试验明确了各因素对分级效率的影响规律, 采用 L16 (4<superscript>5</superscript>) 正交实验设计, 揭示了结构参数与操作参数的协同调控效应。结果表明: 各因素对分级效率影响的顺序为给矿细 度−38 μ m 占比>沉砂嘴直径>给矿流量>给矿浓度>溢流管插入深度, 最优参数组合为给矿流量 152 m³/h 、给矿浓度 39% 、给矿细度−38 μ m 占比 37% 、沉砂嘴直径 16 mm、溢流管插入深度 105 mm, 旋流器分级效率达 66.27%, 较原工艺提升 22.86 百分点。研究成果可为同类选矿厂磨矿分级工艺 优化提供理论依据和实践参考。 [ABSTRACT FROM AUTHOR] – Name: Abstract Label: Group: Ab Data: <i>Copyright of Gold (1001-1277) is the property of Gold Magazine Editorial Office and its content may not be copied or emailed to multiple sites without the copyright holder's express written permission. Additionally, content may not be used with any artificial intelligence tools or machine learning technologies. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract.</i> (Copyright applies to all Abstracts.) |
| PLink | https://search.ebscohost.com/login.aspx?direct=true&site=eds-live&db=edb&AN=197205506 |
| RecordInfo | BibRecord: BibEntity: Identifiers: – Type: doi Value: 10.11792/hj20260913 Languages: – Code: chi Text: Chinese PhysicalDescription: Pagination: PageCount: 6 StartPage: 90 Subjects: – SubjectFull: Separation (Technology) Type: general – SubjectFull: Parameterization Type: general – SubjectFull: Feed quality Type: general – SubjectFull: Machine separators Type: general – SubjectFull: Mathematical optimization Type: general Titles: – TitleFull: 某选矿厂旋流器分级工艺优化试验研究. Type: main BibRelationships: HasContributorRelationships: – PersonEntity: Name: NameFull: 苑文波 – PersonEntity: Name: NameFull: 田 伟 – PersonEntity: Name: NameFull: 潘凤娇 – PersonEntity: Name: NameFull: 梁树丰 IsPartOfRelationships: – BibEntity: Dates: – D: 01 M: 09 Text: sep2026 Type: published Y: 2026 Identifiers: – Type: issn-print Value: 10011277 Numbering: – Type: volume Value: 47 – Type: issue Value: 9 Titles: – TitleFull: Gold (1001-1277) Type: main |
| ResultId | 1 |