Academic Journal
Προβολή σε EDS

A novel electroplastic-assisted ploughing extrusion-cutting (EAPE-C) method for fabricating structured fins: morphological evolution and chip formation mechanism.

Λεπτομέρειες βιβλιογραφικής εγγραφής
Τίτλος: A novel electroplastic-assisted ploughing extrusion-cutting (EAPE-C) method for fabricating structured fins: morphological evolution and chip formation mechanism.
Συγγραφείς: Lv, Yingxin1,2 (AUTHOR), He, Chuan1,2 (AUTHOR), Zhang, Bo1,2 (AUTHOR), Li, Haiyu1,2 (AUTHOR), Chen, Guangjun1,2 (AUTHOR) gjchen@tute.edu.cn
Πηγή: International Journal of Advanced Manufacturing Technology. Aug2026, Vol. 145 Issue 11/12, p8579-8604. 26p.
Θεματικοί όροι: *Material plasticity, *Manufacturing processes, *Heat transfer, *Fabrication (Manufacturing), *Morphology
Περίληψη: Structured fins with complex geometries are extensively applied in high-end fields such as aerospace and electronic heat sinks, wherein stringent requirements for forming accuracy, array uniformity, and thermal contact performance severely restrict their efficient manufacturing. While conventional methods—such as milling, rolling, and electrical discharge machining—can fabricate such microstructures, they remain constrained by high energy consumption, low efficiency, and poor morphological consistency. To overcome these limitations, this study proposes a novel electroplastic-assisted ploughing extrusion-cutting (EAPE-C) method for fabricating structured fins. Integrating the efficiency and flexibility of ploughing extrusion-cutting, the electroplastic effect is introduced into an electro-thermal-mechanical coupled processing regime. Under the synergistic action of Joule heating and electron wind force induced by pulsed current, the yield strength of the workpiece decreases, thereby promoting the plastic flow of pure copper. Experimental results indicate that elevating pulse peak current and frequency intensifies this coupling effect, significantly enhancing plastic extension along the height direction. This manifests as a progressive increase in fin height, accompanied by slight reductions in width and bottom thickness. Compared to conventional PE-C, EAPE-C effectively improves material flowability, mitigates surface tearing, and transforms surface morphology from rough to smooth, substantially improving geometric consistency. Further analysis reveals that increased spindle speeds facilitate fin height growth and width reduction, whereas larger feed rates suppress height development and increase width. Metallographic observations and shear slip-line analysis corroborate the role of the electroplastic effect in promoting plastic deformation on plastic deformation, establishing the mechanical foundation for stable fin formation. [ABSTRACT FROM AUTHOR]
Βάση Δεδομένων: Academic Search Index
FullText Text:
  Availability: 0
CustomLinks:
  – Url: https://dx.doi.org/doi:10.1007/s00170-026-18801-3
    Name: EDS - Springer Nature Journals (s7799221)
    Category: fullText
    Text: View record at Springer
  – Url: https://resolver.ebsco.com/c/fiv2js/result?sid=EBSCO:asx&genre=article&issn=02683768&ISBN=&volume=145&issue=11%2F12&date=20260815&spage=8579&pages=8579-8604&title=International Journal of Advanced Manufacturing Technology&atitle=A%20novel%20electroplastic-assisted%20ploughing%20extrusion-cutting%20%28EAPE-C%29%20method%20for%20fabricating%20structured%20fins%3A%20morphological%20evolution%20and%20chip%20formation%20mechanism.&aulast=Lv%2C%20Yingxin&id=DOI:10.1007/s00170-026-18801-3
    Name: Full Text Finder (for New FTF UI) (ns324271)
    Category: fullText
    Text: Full Text Finder
    MouseOverText: Full Text Finder
Header DbId: asx
DbLabel: Academic Search Index
An: 196963512
RelevancyScore: 1452
AccessLevel: 6
PubType: Academic Journal
PubTypeId: academicJournal
PreciseRelevancyScore: 1452.42504882813
IllustrationInfo
Items – Name: Title
  Label: Title
  Group: Ti
  Data: A novel electroplastic-assisted ploughing extrusion-cutting (EAPE-C) method for fabricating structured fins: morphological evolution and chip formation mechanism.
– Name: Author
  Label: Authors
  Group: Au
  Data: <searchLink fieldCode="AR" term="%22Lv%2C+Yingxin%22">Lv, Yingxin</searchLink><relatesTo>1,2</relatesTo> (AUTHOR)<br /><searchLink fieldCode="AR" term="%22He%2C+Chuan%22">He, Chuan</searchLink><relatesTo>1,2</relatesTo> (AUTHOR)<br /><searchLink fieldCode="AR" term="%22Zhang%2C+Bo%22">Zhang, Bo</searchLink><relatesTo>1,2</relatesTo> (AUTHOR)<br /><searchLink fieldCode="AR" term="%22Li%2C+Haiyu%22">Li, Haiyu</searchLink><relatesTo>1,2</relatesTo> (AUTHOR)<br /><searchLink fieldCode="AR" term="%22Chen%2C+Guangjun%22">Chen, Guangjun</searchLink><relatesTo>1,2</relatesTo> (AUTHOR)<i> gjchen@tute.edu.cn</i>
– Name: TitleSource
  Label: Source
  Group: Src
  Data: <searchLink fieldCode="JN" term="%22International+Journal+of+Advanced+Manufacturing+Technology%22">International Journal of Advanced Manufacturing Technology</searchLink>. Aug2026, Vol. 145 Issue 11/12, p8579-8604. 26p.
– Name: Subject
  Label: Subject Terms
  Group: Su
  Data: *<searchLink fieldCode="DE" term="%22Material+plasticity%22">Material plasticity</searchLink><br />*<searchLink fieldCode="DE" term="%22Manufacturing+processes%22">Manufacturing processes</searchLink><br />*<searchLink fieldCode="DE" term="%22Heat+transfer%22">Heat transfer</searchLink><br />*<searchLink fieldCode="DE" term="%22Fabrication+%28Manufacturing%29%22">Fabrication (Manufacturing)</searchLink><br />*<searchLink fieldCode="DE" term="%22Morphology%22">Morphology</searchLink>
– Name: Abstract
  Label: Abstract
  Group: Ab
  Data: Structured fins with complex geometries are extensively applied in high-end fields such as aerospace and electronic heat sinks, wherein stringent requirements for forming accuracy, array uniformity, and thermal contact performance severely restrict their efficient manufacturing. While conventional methods—such as milling, rolling, and electrical discharge machining—can fabricate such microstructures, they remain constrained by high energy consumption, low efficiency, and poor morphological consistency. To overcome these limitations, this study proposes a novel electroplastic-assisted ploughing extrusion-cutting (EAPE-C) method for fabricating structured fins. Integrating the efficiency and flexibility of ploughing extrusion-cutting, the electroplastic effect is introduced into an electro-thermal-mechanical coupled processing regime. Under the synergistic action of Joule heating and electron wind force induced by pulsed current, the yield strength of the workpiece decreases, thereby promoting the plastic flow of pure copper. Experimental results indicate that elevating pulse peak current and frequency intensifies this coupling effect, significantly enhancing plastic extension along the height direction. This manifests as a progressive increase in fin height, accompanied by slight reductions in width and bottom thickness. Compared to conventional PE-C, EAPE-C effectively improves material flowability, mitigates surface tearing, and transforms surface morphology from rough to smooth, substantially improving geometric consistency. Further analysis reveals that increased spindle speeds facilitate fin height growth and width reduction, whereas larger feed rates suppress height development and increase width. Metallographic observations and shear slip-line analysis corroborate the role of the electroplastic effect in promoting plastic deformation on plastic deformation, establishing the mechanical foundation for stable fin formation. [ABSTRACT FROM AUTHOR]
PLink https://search.ebscohost.com/login.aspx?direct=true&site=eds-live&db=asx&AN=196963512
RecordInfo BibRecord:
  BibEntity:
    Identifiers:
      – Type: doi
        Value: 10.1007/s00170-026-18801-3
    Languages:
      – Code: eng
        Text: English
    PhysicalDescription:
      Pagination:
        PageCount: 26
        StartPage: 8579
    Subjects:
      – SubjectFull: Material plasticity
        Type: general
      – SubjectFull: Manufacturing processes
        Type: general
      – SubjectFull: Heat transfer
        Type: general
      – SubjectFull: Fabrication (Manufacturing)
        Type: general
      – SubjectFull: Morphology
        Type: general
    Titles:
      – TitleFull: A novel electroplastic-assisted ploughing extrusion-cutting (EAPE-C) method for fabricating structured fins: morphological evolution and chip formation mechanism.
        Type: main
  BibRelationships:
    HasContributorRelationships:
      – PersonEntity:
          Name:
            NameFull: Lv, Yingxin
      – PersonEntity:
          Name:
            NameFull: He, Chuan
      – PersonEntity:
          Name:
            NameFull: Zhang, Bo
      – PersonEntity:
          Name:
            NameFull: Li, Haiyu
      – PersonEntity:
          Name:
            NameFull: Chen, Guangjun
    IsPartOfRelationships:
      – BibEntity:
          Dates:
            – D: 15
              M: 08
              Text: Aug2026
              Type: published
              Y: 2026
          Identifiers:
            – Type: issn-print
              Value: 02683768
          Numbering:
            – Type: volume
              Value: 145
            – Type: issue
              Value: 11/12
          Titles:
            – TitleFull: International Journal of Advanced Manufacturing Technology
              Type: main
ResultId 1