-
1Academic Journal
Authors: M. A. A. Attia, E. M. M. Ewais, М. А. А. Аттия, Э. М. М. Эвайс
Source: NOVYE OGNEUPORY (NEW REFRACTORIES); № 7 (2020); 36-44 ; Новые огнеупоры; № 7 (2020); 36-44 ; 1683-4518 ; 10.17073/1683-4518-2020-7
Subject Terms: hot-pressed Si3N4 ceramics, spinel, microstructure, fracture toughness, hardness, bending strength, cold crushing strength, горячепрессованная Si3N4-керамика, шпинель, микроструктура, вязкость разрушения, твердость, предел прочности при изгибе, предел прочности при сжатии при комнатной температуре
File Description: application/pdf
Relation: https://newogneup.elpub.ru/jour/article/view/1438/1227; Bengisu, M. Engineering сeramics / M. Bengisu. ― Berlin, Germany, 2001. ― Р. 28‒30, 358, 407‒444.; Schilp, H. Fabrication of turbine-compressor-shaft assembly for мicro gas turbine engine / H. Schilp // M.Sc. thesis, Rapid prototyping laboratory Stanford University and Institute for Metal Forming and Casting University München, 2000.; Pierson, H. O. Handbook of refractory carbides and nitrides properties/ Characteristics/ Processing and applications / H. O. Pierson. ― New Jersey, USA, 1996. ― P. 2, 209‒326.; Basu, B. Toughening of yttria-stabilised tetragonal zirconia ceramics / B. Basu // International material review. ― 2005. ― Vol. 50. ― P. 239‒256.; Lin, H. T. Mechanical reliability evaluation of silicon nitride ceramic components after exposure in industrial gas turbines / H. T. Lin, M. K. Ferber // Eur. Ceram. Soc. ― 2002. ― Vol. 22. ― P. 2789‒2797.; Basu, B. Transformation behavior of yttria stabilized tetragonal zirconia polycrystal–TiB2 composites / B. Basu, J. Vleugels, O. Van Der Biest // J. Mater. Res. ― 2001. ― Vol. 16. ― P. 2158‒2169.; Tuan, W. H. Mechanical properties of Al2O3/ZrO2 composites / W. H. Tuan, T. C. Chen, C. H. Wang // J. Eur. Ceram. Soc. ― 2002. ― Vol. 22. ― P. 2827‒2833.; Lo, W. T. The effects of ytterbium oxide on the microstructure and R-curve behaviors of silicon nitride / W. T. Lo, J. L. Huang, Z. H. Shih // Mater. Chem. Phys. ― 2002. ― Vol. 73. ― P. 123‒128.; Fisher, J. G. Microwave reaction bonding of silicon nitride using an inverse temperature gradient and ZrO2 and Al2O3 sintering additives / J. G. Fisher, S. K. Woo, K. Bai // J. Eur. Ceram. Soc. ― 2003. ― Vol. 23. ― P. 791‒799.; Ling, G. Pressureless sintering of silicon nitride with magnesia and yttria / G. Ling, H. Yang // Mater. Chem. Phys.― 2005. ― Vol. 90. ― P. 31‒34.; Sun, Y. Effect of hexagonal BN on the microstructure and mechanical properties of Si3N4 ceramics / Y. Sun, Q. Menga, D. Jia // J. Mater. Process. Technol. ― 2007. ― Vol. 138. ― P. 134‒138.; Biasini, V. Silicon nitride-silicon carbide composite materials / V. Biasini, S. Guicciardi, A. Bellosi // Int. J. of Refract. Met. Hard Mater. ― 1992. ― Vol. 11. ― P. 213—221.; Kaya, H. The application of ceramic-matrix composites to the automotive ceramic gas turbine / H. Kaya // Compos. Sci. Technol. ― 1999. ― Vol. 59. ― P. 861‒872.; Demir, A. Mechanical property improvements in nicalon SiC fibre reinforced silicon nitride ceramics by oxide coating of Si3N4 starting powders / A. Demir, Z. Tatli // Composites. Part A. ― 2004. ― Vol. 35. ― P. 1433‒1440.; Sancho, J. P. Toughness of Si3N4 ceramics obtained by precipitating sintering aids as hydroxides / J. P. Sancho, J. P. Pero-Sanz, L. F. Verdeja // Materials Characterization. ― 2003. ― Vol. 50. ― P. 11‒22.; Stolarski, T. A. Attrition of silicon nitride as a function of counterface material and contact zone kinematics / T. A. Stolarski // J. Mater. Sci. ― 2001. ― Vol. 36. ― P. 1911‒1919.; Kobayashi, K. Current progress in Japan of advanced ceramics for high temperature application / K. Kobayashi // Materials & Design. ― 1990. ― Vol. 11. ― P. 59‒70.; Liu, X. J. Microstructure and mechanical properties of silicon nitride ceramics prepared by pressureless sintering with MgO–Al2O3–SiO2 as sintering additive / X. J. Liu, Z. Y. Huang, Q. M. Ge // J. Eur. Ceram. Soc. ― 2005. ― Vol. 25. ― P. 3353‒3359.; Warren, R. Ceramic Matrix Composites / R. Warren. ― New York, USA, 1992. ― P. 1‒11, 38, 51, 106, 152.; Cahn, R. W. Encyclopedia of materials science and technology / R. W. Cahn. ― UK, 2001.; King, A. G. Ceramic technology and processing / A. G. King. ― New York, USA, 2002. ― P. 134‒175, 231—290, 336.; Pablos, A. D. Correlation between microstructure and toughness of hot pressed Si3N4 ceramics seeded with β-Si3N4 particles / A. D. Pablos, M. I. Osendi, P. Miranzo // Ceram. Int. ― 2003. ― Vol. 29. ― P. 757‒764.; Abovyan, L. S. Synthesis of alumina-silicon carbide composites by chemically activated self-propagating reactions / L. S. Abovyan, H. H. Nersisyan, S. L. Kharatyan // Ceram. Int. ― 2001. ― Vol. 27. ― P. 163‒169.; Yeh, C. L. Use of Si3N4 as a reactant in preparation of TiN‒ Ti5Si3 composites by solid-state SHS reactions / C. L. Yeh, G. S. Teng // Alloys and Compounds. ― 2007. ― Vol. 429. ― P. 126‒132.; Bermudo, J. Study of AlN and Si3N4 powders synthesized by SHS reactions / J. Bermudo, M. I. Osendi // Ceram. Int. ― 1999. ― Vol. 25. ― P. 607‒612.; Matovic, B. Low temperature sintering additives for silicon nitride / B. Matovic. ― PhD thesis, Max-plankinstitute Stuttgart, 2003.; Swift, G. A. Neutron diffraction study of in situreinforced silicon nitride during creep / G. A. Swift. ― PhD, California Institute of Technology Pasadena, California, March 2004.; Ordonez, S. The influence of amount and type of additives on β → β-Si3N4 transformation / S. Ordonez // J. Mater. Sci. ― 1999. ― Vol. 34. ― P. 147‒153.; Dai, J. Effect of the residual phases in β-Si3N4 seed on the mechanical properties of self-reinforced Si3N4 ceramics / J. Dai, J. Li, Y. Chen // J. Eur. Ceram. Soc. ― 2003. ― Vol. 23. ― P. 1543‒1547.; Xu, X. Effects of α/β ratio in starting powder on microstructure and mechanical properties of silicon nitride ceramics / X. Xu, L. Huang, X. Liu // Ceram. Int. ― 2002. ― Vol. 28. ― P. 279‒281.; Nakamura, M. Wear behaviour of α-Si3N4 ceramics reinforced by rod-like β-Si3N4 grains / M. Nakamura, K. Hirao, Y. Yamauchi // Wear. ― 2003. ― Vol. 254. ― P. 94‒102.; Ogata, S. A comparative ab initio study of the ideal strength of single crystal α- and β-Si3N4 / S. Ogata, N. Hirosaki, C. Kocer // Acta Mater. ― 2004. ― Vol. 52. ― P. 233‒238.; Lee, C. J. Effect of β- Si3N4 starting powder size on elongated grain growth in β-Si3N4 ceramics / C. J. Lee, J. I. Chae, D. J. Kim // J. Eur. Ceram. Soc. ― 2000. ― Vol. 20. ― P. 2667‒2671.; Kim, Y. C. Effect of microwave heating on densification and α → β phase transformation of silicon nitride / Y. C. Kim, C. H. Kim, D. K. Kim // J. Eur. Ceram. Soc. ― 1997. ― Vol. 17. ― P. 1625‒1630.; Sneary, P. R. Effect of whisker aspect ratio on the density and fracture toughness of SiC whisker-reinforced Si3N4 / P. R. Sneary, Z. Yeh, M. J. Crimp // J. Mater. Sci. ― 2001. ― Vol. 36. ― P. 2529‒2534.; Guaay, V. Processing and properties of pressurelesssintered Si3N4‒SiC composites / V. Guaay, S. Hampshire // Mater. Process. Technol. ― 1995. ― Vol. 54. ― P. 348‒354.; Haitao, Y. Effect of MgO/CeO2 on pressureless sintering of silicon nitride / Y. Haitao, G. Ling, Y. Runzhang // Mater. Chem. Phys. ― 2001. ― Vol. 69. ― P. 281‒283.; Yang, H. Pressurelesss sintering of silicon nitride with magnesia and ceria / H. Yang, G. Yang, R. Yuan // Mater. Res. Bull. ― 1998. ― Vol. 33. ― P. 1467‒1473.; Penas, O. Processing, microstructure, mechanical properties of Si3N4 obtained by slip casting and pressureless sintering / O. Penas, R. Zenati, J. Dubois // Ceram. Int. ― 2001. ― Vol. 27. ― P. 591‒596.; Bykov, Y. V. Sintering of Si3N4 ceramics with additives containing yttrium and ytterbium oxides with microwave and traditional heating / Y. V. Bykov, O. I. Getman, V. V. Panichkina // Powder Metall. Metal. Ceram. ― 2001. ― Vol. 40. ― P. 112‒120.; Lu, F. The effects of shock activation on sintering Si3N4 ceramics / F. Lu, Q. Cai, L. Lu // Mater. Process. Technol. ― 2004. ― Vol. 147. ― P. 90‒93.; Choi, H. J. High temperature strength and oxidation behaviour of hot-pressed silicon nitride-disilicate ceramics / H. J. Choi, J. G. Lee // J. Mater. Sci. ― 1997. ― Vol. 32. ― P. 1937‒1942.; Lee, Y. I. Effects of additive amount on microstructure and mechanical properties of silicon carbide-silicon nitride composites / Y. I. Lee, Y. W. Kim // J. Mater. Sci. ― 2001. ― Vol. 36. ― P. 699‒702.; Baldacim, S. A. Mechanical properties evaluation of hot-pressed Si3N4–SiC(w) composites / S. A. Baldacim, C. Santos, O. M. M. Silva // Int. J. of Refractory Metals & Hard Materials. ― 2003. ― Vol. 21. ― P. 233‒239.; Ewais, E. M. M. Investigation of the effect of ZrO2 and ZrO2/Al2O3 additions on the hot-pressing and properties of equimolecular mixtures of α- & β-Si3N4 / E. M. M. Ewais, M. A. A. Attia, A. A. Hegazy, R. K. Bordia // Ceram. Int. ― 2010. ― Vol. 36. ― P. 1327‒1338.; Bhandhubanyong, P. Forming of silicon nitride by the HIP process / P. Bhandhubanyong, T. Akhadejdamrong // Mater. Process. Technol. ― 1997. ― Vol. 63. ― P. 277‒280.; Hoffmann, M. J. Potential of the sinter-HIP-technique for the development of high-temperature resistant Si3N4 ceramics / M. J. Hoffmann, A. Geyer, R. Oberacker // J. Eur. Ceram. Soc. ― 1999. ― Vol. 19. ― P. 2359‒2366.; Wan, J. Spark plasma sintering of silicon nitride / silicon carbide nanocomposites with reduced additive amounts / J. Wan, R. G. Duan, A. K. Mukherjee // Scripta Mater. ― 2005. ― Vol. 53. ― P. 663‒667.; Jung, Y. G. Fabrication of silicon nitride bilayer for roller bearing by plasma activated sintering / Y. G. Jung, J. H. Shin, C. G. Ha // Mater. Lett. ― 2002. ― Vol. 56. ― P. 1093‒1097.; Attia, M. A. A. X-ray induced color change on dense yttria samples obtained by spark plasma sintering / M. A. A. Attia, S. Garronib, D. Chiriu [et al.] // J. Chem. Phys. Lett. ― 2015. ― Vol. 618. ― P. 108‒113.; Attia, M. A. A. Effects of prior annealing on the spark plasma sintering of nanostructured Y2O3 powders / M. A. A. Attia, R. Orrù, F. Delogu [et al.] // J. Am. Ceram. Soc. ― 2015. ― P. 1‒7. DOI:10.1111/ jace.13515.; Lee, B. T. Effect of sintering additives on the nitridation behavior of reaction-bonded silicon nitride / B. T. Lee, H. D. Kim // Mater. Sci. Eng. ― 2004. ― Vol. A364. ― P. 126‒131.; Albano, M. P. Dispersion of aluminum hydroxide coated Si3N4 powders with ammonium polyacrylate dispersant / M. P. Albano, L. B. Garrido, A. B. Garcia // Colloids and Surfaces A: Physicochemical and Engineering Aspects. ― 2001. ― Vol. 181. ― P. 69‒78.; Vuckovic, A. Effect of β-Si3N4 seeds on densification and fracture toughness of silicon nitride / A. Vuckovic, S. Boskovic, B. Matovic // Ceram. Int. ― 2006. ― Vol. 32. ― P. 303‒307.; Kitayama, M. Modeling and simulation of grain growth in Si3N4. II. The α‒β transformation / M. Kitayama, K. Hirao, M. Toriyama // Acta Mater. ― 1998. ― Vol. 46. ― P. 6551‒6557.; Bonnie, L. Shock-enhanced alpha to beta phase transformation in Si3N4 powders / L. Bonnie, A. Turner, N. Naresh // Mater. Sci. Eng. ― 1998. ― Vol. A256. ― P. 289‒300.; Huang, Y. Effects of liquid medium and ball-milling on the surface group and aqueous dispersibility of Si3N4 powder / Y. Huang, J. Qing, T. Ma // Eur. Ceram. Soc. ― 2003. ― Vol. 23. ―P. 985—990.; Guicciardi, S. Effects of testing temperature and thermal treatments on some mechanical properties of a Si3N4/TiN composite / S. Guicciardi, V. Melandri, A. Bellosi // Mater. Sci. Eng. ― 2003. ― Vol. A360. ― P. 35‒45.; Umehara, N. Magnetic fluid grinding of HIP Si3N4 rollers / N. Umehara, R. Komanduri // Wear. ― 1996. ― Vol. 192. ― P. 85‒93.; Tatli, Z. Low temperature densification of silicon nitride materials / Z. Tatli, D. P. Thompson // J. Eur. Ceram. Soc. ― 2007. ― Vol. 27. ― P. 791‒795.; Demir, V. Vacuum heat treatment of LiAlO2 densified silicon nitride ceramics / V. Demir, D. P. Thompson // Materials and Design. ― 2006. ― Vol. 27. ― P. 1102‒1107.; Kleina, R. Influence of additives content on the high temperature oxidation of silicon nitride based composites / R. Kleina, V. Medrib, M. D. Bruta // Eur. Ceram. Soc. ― 2003. ― Vol. 23. ― P. 603‒611.; German, M. Model materials for liqauid phase sintering ― the case for tungstain heavy alloys / M. German, P. Suri // Proceeding of the 4th international conference on science, technology and application of sintering France, 2005. ― P. 280‒282.; Kutz, M. Handbook of Materials Selection / M. Kutz. ― New York, USA, 2002. ― P. 1113‒1163.; Annual book of ASTM standards. 2006. ― Section 15. ― Vol. 15.01.; Albakry, M. Fracture toughness and hardness evaluation of three pressable all-ceramic dental materials / M. Albakry, M. Guazzato, M. V. Swain // Journal of Dentistry. ― 2003. ― Vol. 31. ― P. 181‒188.; Mukhopadhyay, A. Pressureless sintering of ZrO2‒ ZrB2 composites: Microstructure and properties / A. Mukhopadhyay // Int. J. of Refract. Met. Hard Mater.― 2006. ― P. 985‒990.; Santos, C. Mechanical properties improvement related to the isothermal holding time in Si3N4 ceramics sintered with an alternative additive / C. Santos, K. Strecker, S. A. Baldacim // Int. J. Refract. Met. Hard Mater. ― 2003. ― Vol. 21. ― P. 245‒250.; Baldacim, S. A. Mechanical properties of ceramic composite / S. A. Baldacim, C. A. A. Cairo, C. R. M. Silva // Mater. Process. Technol. ― 2001. ― Vol. 119. ― P. 273‒276.; Sergejev, F. Comparative study on indentation fracture toughness measurements of cemented carbides / F. Sergejev, M. Antonov // Proc. Estonian Acad. Sci. Eng. ― 2006. ― Vol. 12. ― P. 388‒398.; Inagaki, Y. Synthesis and evaluation of anisotropic porous silicon nitride / Y. Inagaki, Y. Shigegaki, T. Ohji // J. Eur. Ceram. Soc. ― 2004. ― Vol. 24. ― P. 197‒200.; Dogan, C. P. Microstructure and abrasive wear in silicon nitride ceramics / C. P. Dogan, J. A. Hawk // Wear. ― 2001. ― Vol. 250. ― P. 256‒263.; Monteverde, F. Advances in microstructure and mechanical properties of zirconium diboride based ceramics / F. Monteverde, S. Guicciardi, A. Bellosi // Mater. Sci. Eng. ― 2003. ― Vol. A346. ― P. 310‒319.; Stathis, G. Effect of firing conditions, filler grain size and quartz content on bending strength and physical properties of sanitary ware porcelain / G. Stathis, A. Ekonomakou, C. J. Stournaras // J. Eur. Ceram. Soc. ― 2004. ― Vol. 24. ― P. 2357‒2366.; Ewais, E. M. M. Optimal conditions and significant factors for fabrication of soda lime glass foam from industrial waste using nano AlN / E. M. M. Ewais, M. A. A. Attia, A. A. M. El-Amir, A. M. H. Elshenway, T. Fend // J. Alloys Compd. ― 2018. ― Vol. 747. ― P. 408‒415.; Ewais, E. M. M. Sintering responses of in-situ zirconia/mullite ceramic composite / E. M. M. Ewais // Am. Ceram. Soc. Bull. ― 2008. ― Vol. 86. ― P. 9101‒9110.; https://newogneup.elpub.ru/jour/article/view/1438