-
1Academic Journal
Συγγραφείς: V. A. Lapitskaya, R. E. Trukhan, A. V. Khabarova, T. A. Kuznetsova, S. S. Chizhik, J. A. Solovjov, V. A. Pilipenko, K. S. Liutsko, A. A. Nasevich, Yu Guangbin, В. А. Лапицкая, Р. Э. Трухан, А. В. Хабарова, Т. А. Кузнецова, С. А. Чижик, Я. А. Соловьёв, В. А. Пилипенко, К. С. Люцко, А. А. Насевич, Ю Гуанбин
Συνεισφορές: the work was supported by the Belarusian Republican Foundation for Fundamental Research (grants no. Т23ME-010 and no. Т17КIG-009)., работа выполнена при финансовой поддержке Белорусского республиканского фонда фундаментальных исследований (гранты № Т23МЭ-010 и № Т17КИГ-009).
Πηγή: Proceedings of the National Academy of Sciences of Belarus. Physical-technical series; Том 69, № 4 (2024); 271-278 ; Известия Национальной академии наук Беларуси. Серия физико-технических наук; Том 69, № 4 (2024); 271-278 ; 2524-244X ; 1561-8358 ; 10.29235/1561-8358-2024-69-4
Θεματικοί όροι: наноиндентирование, nickel and chrome silicides, silicon substrate, rapid thermal treatment, grain size, mechanical properties, atomic force microscopy, nanoindentation, силициды никеля и хрома, кремниевая подложка, быстрая термическая обработка, размер зерна, механические свойства, атомно-силовая микроскопия
Περιγραφή αρχείου: application/pdf
Relation: https://vestift.belnauka.by/jour/article/view/862/679; Shishido T., Okada S., Ishizawa Y., Kudou K., Iizumi K., Sawada Y., Horiuchi H. [et al.]. Molten metal flux growth and properties of CrSi2. Journal of Alloys and Compounds, 2004, vol. 383, iss. 1–2, pp. 319–321. https://doi.org/10.1016/j.jallcom.2004.04.037; Murarka Sh. P. Silicides for VLIC. Moscow, Mir Publ., 1986. 176 p. (in Russian).; Kumar K. S. Intermetallics: Silicides. Encyclopedia of Materials: Science and Technology. 2nd ed. Elsevier, 2001, pp. 4243–4246. https://doi.org/10.1016/B0-08-043152-6/00744-0; Zhu J., Barbier D., Mayet L., Gavand M., Chaussemy G. Interstitial chromium behaviour in silicon during rapid thermal annealing. Applied Surface Science, 1989, vol. 36, iss. 1–4, pp. 413–420. https://doi.org/10.1016/0169-4332(89)90937-9; D’Anna E., Leggieri G., Luches A., Majni G., Ottaviani G. Chromium silicide formation under pulsed heat flow. Thin Solid Films, 1986, vol. 136, iss. 1, pp. 93–104. https://doi.org/10.1016/0040-6090(86)90112-4; Liu C. M., Liu W. L., Hsieh S. H., Tsai T. K., Chen W. J. Interfacial reactions of electroless nickel thin films on silicon. Applied Surface Science, 2005, vol. 243, iss.1–4, pp. 259–264. https://doi.org/10.1016/j.apsusc.2004.09.110; Deneb Menda U., Özdemir O., Tatar B., Ürgen M., Kutlu K. Transport and storage properties of CrSi2/Si junctions made using the CAPVD technique. Materials Science in Semiconductor Processing, 2010, vol. 13, iss. 4, pp. 257–266. https:// doi.org/10.1016/j.mssp.2010.12.002; Zhao F. F., Zheng J. Z., Shen Z. X., Osipowicz T., Gao W. Z., Chan L. H. Thermal stability study of NiSi and NiSi2 thin films. Microelectronic Engineering, 2004, vol. 71, iss. 1, pp. 104–111. https://doi.org/10.1016/j.mee.2003.08.010; Okubo K., Tsuchiya Y., Nakatsuka O., Sakai A., Zaima S., Yasuda Y. Influence of structural variation of Ni silicide thin films on electrical property for contact materials. Japanese Journal of Applied Physics, 2004, vol. 43, pp. 1896. https://doi.org/10.1143/JJAP.43.1896; Waidmann S., Kahlert V., Streck C., Press P., Kammler T., Dittmar K., Rinderknecht J. Tuning nickel silicide properties using a lamp based RTA, a heat conduction based RTA or a furnace anneal. Microelectronic Engineering, 2006, vol. 83, iss. 11–12, pp. 2282–2286. https://doi.org/10.1016/j.mee.2006.10.020; Ren B., Lu D. H., Zhou R., Ji D. P., Hu M. Y., Feng J. First principles study of stability, mechanical, and electronic properties of chromium silicides. Chinese Physics B, 2018, vol. 27, art. ID 107102. http://dx.doi.org/10.1088/1674-1056/27/10/107102; Wang L., Gao Y., Xue Q. A comparative study on the tribological behavior of nanocrystalline nickel and cobalt coatings correlated with grain size and phase structure. Materials Chemistry and Physics, 2006, vol. 99, iss. 1, pp. 96–103. https://doi.org/10.1016/j.matchemphys.2005.10.014; Laptev A. A., Belomyttsev M. Yu., Laptev A. I. Mechanical properties of nickel-silicon alloys. Izvestiya vysshikh uchebnykh zavedenii. Chernaya metallurgiya = Izvestiya. Ferrous Metallurgy, 2014, vol. 57, no. 5, pp. 47–50 (in Russian) https://doi.org/10.17073/0368-0797-2014-5-47-50; Chu F., Lei M., Maloy S.A., Petrovic J. J., Mitchell T. E. Elastic properties of C40 transition metal disilicides. Acta Materialia, 1996, vol. 44, iss. 8, pp. 3035–3048. https://doi.org/10.1016/1359-6454(95)00442-4; Pan Y. Structural Prediction and Overall Performances of CrSi2 Disilicides: DFT Investigations. ACS Sustainable Chemistry & Engineering, 2020, vol. 8, iss. 29, pp. 11024–11030. https://doi.org/10.1021/acssuschemeng.0c04737; Golovin Yu. I. Nanoindentation and Its Capabilities. Moscow, Mashinostroenie Publ., 2009. 312 p. (in Russian).; Kuznetsova T., Lapitskaya V., Solovjov J., Chizhik S., Pilipenko V., Aizikovich S. Properties of CrSi2 Layers Obtained by Rapid Heat Treatment of Cr Film on Silicon. Nanomaterials, 2021, vol. 11, iss. 7, art. ID 1734. https://doi.org/10.3390/nano11071734; Lapitskaya V., Trukhan R., Kuznetsova T., Solovjov J., Chizhik S., Pilipenko V., Liutsko K. [et al.]. Microstructure and Properties of Thin-Film Submicrostructures Obtained by Rapid Thermal Treatment of Nickel Films on Silicon. Surfaces, 2024, vol. 7, iss. 2, pp. 196–207. https://doi.org/10.3390/surfaces7020013; Gül F. Addressing the sneak-path problem in crossbar RRAM devices using memristor-based one Schottky diode-one resistor array. Results Physics, 2019, vol. 12, pp. 1091–1096. https://doi.org/10.1016/j.rinp.2018.12.092; Galkin N. G., Astashynski V. M., Chusovitin E. A., Galkin K. N., Dergacheva T. A., Kuzmitski A. M., Kostyukevich E. A. Ultra high vacuum growth of CrSi2 and β-FeSi2 nanoislands and Si top layers on the plasma modified monocrystalline silicon surfaces. Physics Procedia, 2011, vol. 11, pp. 39–42. https://doi.org/10.1016/j.phpro.2011.01.009; Adusumilli P., Seidman D. N., Murray C. E. Silicide-phase evolution and platinum redistribution during silicidation of Ni0.95Pt0.05/Si(100) specimens. Journal of Applied Physics, 2012, vol. 112, iss. 6, p. 11. http://doi.org/10.1063/1.4751023; Peter A. P., Meersschaut J., Richard O., Moussa A., Steenbergen J., Schaekers M., Adelmann C. Phase formation and morphology of nickel silicide thin films synthesized by catalyzed chemical vapor reaction of nickel with silane. Chemistry of Materials, 2015, vol. 27, iss. 1, pp. 245–254. http://doi.org/10.1021/cm503810p; Meyers М. А., Mishra A., Benson D. J. Mechanical properties of nanocrystalline materials. Progress in Materials Science, 2006, vol. 51, pp. 427–556. https://doi.org/10.1016/j.pmatsci.2005.08.003; Suzdalev I. P. Nanotechnology. Physicochemistry of Nanoclusters, Nanostructures and Nanomaterials. Moscow, KomKniga Publ., 2006. 592 p. (in Russian).; Pilipenko V. A., Solovjov J. A., Gaiduk P. I. Nickel silicide formation with rapid thermal treatment in the heat balance mode. Doklady Natsional’noi akademii nauk Belarusi = Doklady of the National Academy of Sciences of Belarus, 2021, vol. 65, no. 1, pp. 111–118 (in Russian). https://doi.org/10.29235/1561-8323-2021-65-1-111-118; Solovjov J. A., Pilipenko V. A., Gaiduk P. I. Structure and morphology of CrSi2 layers formed by rapid thermal treatment. Doklady BGUIR, 2020, vol. 18, no. 4, pp. 71–79 (in Russian). https://doi.org/10.35596/1729-7648-2020-18-4-71-79; https://vestift.belnauka.by/jour/article/view/862
-
2Academic Journal
Πηγή: Конденсированные среды и межфазные границы, Vol 26, Iss 3 (2024)
Θεματικοί όροι: тонкая фольга, Chemistry, вольтамперометрия, атомно-силовая микроскопия, очистка поверхности, наноиндентирование, твердый раствор cu-36pd (ат. %), QD1-999
Σύνδεσμος πρόσβασης: https://doaj.org/article/7b9c846e24ff4d059dd2c673e3d980c2
-
3Academic Journal
Συνεισφορές: Рогачёв, А. В.
Θεματικοί όροι: Модуль упругости, Импульсное катодно-дуговое испарение, Отжиг, Наноиндентирование, Нанотвердость, Многослойные титан-углеродные покрытия
Περιγραφή αρχείου: application/pdf
Σύνδεσμος πρόσβασης: https://elib.gstu.by/handle/220612/36882
-
4Academic Journal
Συγγραφείς: Matrenin, Sergey Veniaminovich, Mostovshchikov, Andrey Vladimirovich, Mirovoy, Yury Aleksandrovich, Chudinova, Alexandra Olegovna
Πηγή: Известия Томского политехнического университета
Bulletin of the Tomsk Polytechnic UniversityΘεματικοί όροι: nanoindentation, физико-механические свойства, aluminum nanopowder, наноиндентирование, ceramics, combustion synthesis, hot pressing, синтез сжиганием, горячее прессование, aluminum oxynitride, алюминий, оксинитрид алюминия, zirconium dioxide, нанопорошки, диоксид циркония, керамика
Περιγραφή αρχείου: application/pdf
Σύνδεσμος πρόσβασης: http://earchive.tpu.ru/handle/11683/69969
-
5Academic Journal
Συγγραφείς: V. A. Lapitskaya, T. A. Kuznetsova, S. A. Chizhik, A. A. Rogachev, В. А. Лапицкая, Т. А. Кузнецова, С. А. Чижик, А. А. Рогачёв
Συνεισφορές: the work was supported by the Belarusian Republican Foundation for Fundamental Research (grant no. Т22M-006), работа выполнена при финансовой поддержке Белорусского республиканского фонда фундаментальных исследований (грант № Т22М-006)
Πηγή: Proceedings of the National Academy of Sciences of Belarus. Physical-technical series; Том 68, № 4 (2023); 271-279 ; Известия Национальной академии наук Беларуси. Серия физико-технических наук; Том 68, № 4 (2023); 271-279 ; 2524-244X ; 1561-8358 ; 10.29235/1561-8358-2023-68-4
Θεματικοί όροι: вязкость разрушения, sublayer, atomic force microscopy, nanoindentation, fracture toughness, подслой, атомно-силовая микроскопия, наноиндентирование
Περιγραφή αρχείου: application/pdf
Relation: https://vestift.belnauka.by/jour/article/view/816/643; Robertson J. Diamond-like amorphous carbon. Materials Science and Engineering: R: Reports, 2002, vol. 37, iss. 4–6, pp. 129–281. https://doi.org/10.1016/S0927-796X(02)00005-0; Kumar S., Dwivedi N., Rauthan C. M. S., Panwar O. S. Properties of nitrogen diluted hydrogenated amorphous carbon (n-type a-C:H) films and their realization in n-type a-C:H/p-type crystalline silicon heterojunction diodes. Vacuum, 2010, vol. 84, iss. 7, pp. 882–889. http://doi.org/10.1016/j.vacuum.2009.12.003; Godet C., Kumar S., Chu V. Field-enhanced electrical transport mechanisms in amorphous carbon films. Philosophical Magazine, 2003, vol. 83, no. 29, pp. 3351–3365. https://doi.org/10.1080/14786430310001605010; Zhou Z. B., Cui R. Q., Pang Q. J., Hadi G. M., Ding Z. M., Li W. Y. Schottky solar cells with amorphous carbon nitride thin films prepared by ion beam sputtering technique. Solar Energy Materials and Solar Cells, 2002, vol. 70, iss. 4, pp. 487–493. https://doi.org/10.1016/S0927-0248(01)00086-1; Dwivedi N., Kumar S., Rauthan C. M. S., Panwar O. s., Siwach P. K. Photoluminescence and electrical conductivity of silicon containing multilayer structures of diamond like carbon. Journal of Optoelectronics and Advanced Materials, 2009, vol. 11, pp. 1618–1626.; Weiser P. S., Prawer S., Manory R. R., Hoffman A., Evans P. J., Paterson P. J. K. Chemical vapour deposition of diamond onto steel: the effect of a Ti implant layer. Surface and Coatings Technology, 1995, vol. 71, iss. 2, pp. 167–172. https://doi.org/10.1016/0257-8972(94)01016-C; Chen J. J. Indentation-based methods to assess fracture toughness for thin coatings. Journal of Physics D: Applied Physics, 2012, vol. 45, no. 20, art. ID 203001. https://doi.org/10.1088/0022-3727/45/20/203001; Chen J. J., Bull S. J. Indentation Fracture and Toughness Assessment for Thin Optical Coatings on Glass. Journal of Physics D: Applied Physics, 2007, vol. 40, no. 18, pp. 5401–5417. https://doi.org/10.1088/0022-3727/40/18/S01; Xinjie Chen, Yao Du, Yip-Wah Chung. Commentary on using H/E and H3/E2 as proxies for fracture toughness of hard coatings. Thin Solid Films, 2019, vol. 688, art. ID 137265. https://doi.org/10.1016/j.tsf.2019.04.040; Faisal N. H., Ahmed R., Prathuru A. K., Spence S., Hossain M., Steel J. A. An improved Vickers indentation fracture toughness model to assess the quality of thermally sprayed coatings. Engineering Fracture Mechanics, 2014, vol. 128, pp. 189–204. https://doi.org/10.1016/j.engfracmech.2014.07.015; Jiefang Wang, Tiantian Shao, Xiaolong Cai, Lisheng Zhong, Nana Zhao, Yunhua Xu. Study on Microstructure and Fracture Toughness of TaC Ceramic Coating on HT300. Advanced Materials Research, 2015, vols. 1120–1121, pp. 740–744. https://doi.org/10.4028/www.scientific.net/AMR.1120-1121.740; Zhaoliang Qu, Kai Wei, Qing He, Rujie He, Yongmao Pei, Shixing Wang, Daining Fanga. High temperature fracture toughness and residual stress in thermal barrier coatings evaluated by an in-situ indentation method. Ceramics International, 2018, vol. 44, iss. 7, pp. 7926–7929. https://doi.org/10.1016/j.ceramint.2018.01.230; Kataria S., Srivastava S. K., Kumar P., Srinivas G., Siju, Khan J., Sridhar Rao D. V., Barshilia H. C. Nanocrystalline TiN coatings with improved toughness deposited by pulsing the nitrogen flow rate. Surface and Coatings Technology, 2012, vol. 206, iss. 19–20, pp. 4279–4286. https://doi.org/10.1016/j.surfcoat.2012.04.040; Jianning Ding, Yonggang Meng, Shizhu Wen. Mechanical properties and fracture toughness of multilayer hard coatings using nanoindentation. Thin Solid Films, 2000, vol. 371, iss. 1–2, pp. 178–182. https://doi.org/10.1016/S00406090(00)01004-X; Malzbender J., With G. Energy dissipation, fracture toughness and the indentation load-displacement curve of coated materials. Surface and Coatings Technology, 2000, vol. 135, iss. 1, pp. 60–68. https://doi.org/10.1016/S02578972(00)00906-3; Schiffmann K. I. Determination of fracture toughness of bulk materials and thin films by nanoindentation: comparison of different models. Philosophical Magazine, 2011, vol. 91, iss. 7–9, pp. 1163–1178. https://doi.org/10.1080/14786435.2010.487984; Schwan J., Ulrich S., Batori V., Ehrhardt H., Silva S. R. P. Raman spectroscopy on amorphous carbon films. Journal of Applied Physics, 1996, vol. 80, pp. 440–447. https://doi.org/10.1063/1.362745; Ferrari A. C., Robertson J. Interpretation of Raman spectra of disordered and amorphous carbon. Physical Review B, 2000, vol. 61, iss. 20, pp. 4095–4107. https://doi.org/10.1103/PhysRevB.61.14095; Cloutier M., Harnagea C., Hale P., Seddiki O., Rosei F., Mantovani D. Long-term stability of hydrogenated DLC coatings: Effects of aging on the structural, chemical and mechanical properties. Diamond and Related Materials, 2014, vol. 48, pp. 65–72. https://doi.org/10.1016/j.diamond.2014.07.002; Robertson J., O’Reilly E. P. Electronic and atomic structure of amorphous carbon. Physical Review B, 1987, vol. 35, iss. 6, pp. 2946–2957. https://doi.org/10.1103/PhysRevB.35.2946; Tuinstra F., Koenig J. L. Raman spectrum of graphite. Journal of Chemical Physics, 1970, vol. 53, iss. 3, pp. 1126–1130. https://doi.org/10.1063/1.1674108; Salvadori M. C., Martins D. R., Cattani M. DLC coating roughness as a function of film thickness. Surface and Coatings Technology, 2006, vol. 200, iss. 16–17, pp. 5119–5122. https://doi.org/10.1016/j.surfcoat.2005.05.030; Meng W. J., Gillispie B. A. Mechanical properties of Ti-containing and W-containing diamondlike carbon coatings. Journal of Applied Physics, 1998, vol. 84, iss. 8, pp. 4314–4321. https://doi.org/10.1063/1.368650; Li X., Bhushan B. Evaluation of fracture toughness of ultra-thin amorphous carbon coatings deposited by different deposition techniques. Thin Solid Films, 1999, vol. 355–356, pp. 330–336. http://dx.doi.org/10.1016/S0040-6090(99)00446-0; https://vestift.belnauka.by/jour/article/view/816
-
6Academic Journal
Συγγραφείς: S. A. Zhdanok, S. N. Leonovich, E. N. Polonina, С. А. Жданок, С. Н. Леонович, Е. Н. Полонина
Πηγή: Doklady of the National Academy of Sciences of Belarus; Том 68, № 2 (2024); 164-169 ; Доклады Национальной академии наук Беларуси; Том 68, № 2 (2024); 164-169 ; 2524-2431 ; 1561-8323 ; 10.29235/1561-8323-2024-68-2
Θεματικοί όροι: плотность упаковки, nanoindentation, nanogranules, packing density, наноиндентирование, наногранулы
Περιγραφή αρχείου: application/pdf
Relation: https://doklady.belnauka.by/jour/article/view/1187/1188; Constantinides, G. The nanogranular nature of C–S–H / G. Constantinides, F. J. Ulm // J. Mechanics Phys. Solids. – 2007. – Vol. 55, N 1. – P. 64–90. https://doi.org/10.1016/j.jmps.2006.06.003; Получение комплексной добавки для повышения прочности бетона на основе нанодисперсного диоксида кремния гидротермальных растворов / В. В. Потапов [и др.] // Фундаментальные исследования. – 2012. – № 9-2. – С. 404–409.; Modification of Cement Concrete by Admixtures Containing Nanosized Materials / S. A. Zhdanok [et al.] // J. Eng. Phys. Thermophys. – 2020. – Vol. 93, N 3. – P. 669–673. https://doi.org/10.1007/s10891-020-02163-y; Nanoindentation method for studying the structure of modified cement stone / E. N. Polonina [et al.] // J. Eng. Phys. Thermophys. – 2021. – Vol. 94, N 5. – P. 1194–1207. https://doi.org/10.1007/s10891-021-02400-y; Mechanism for Improving the Strength of a Cement Material Modified by SiO2 Nanoparticles and Multiwall Carbon Nanotubes / E. N. Polonina [et al.] // J. Eng. Phys. Thermophys. – 2021. – Vol. 94, N 1. – P. 67–78. https://doi.org/10.1007/s10891-021-02274-0; https://doklady.belnauka.by/jour/article/view/1187
-
7Conference
Θεματικοί όροι: ВТ1-0, отжиг, твердость, титановые сплавы, наноиндентирование, модули упругости
Περιγραφή αρχείου: application/pdf
Σύνδεσμος πρόσβασης: http://earchive.tpu.ru/handle/11683/74144
-
8
-
9Academic Journal
Πηγή: Известия высших учебных заведений. Физика. 2023. Т. 66, № 3. С. 90-95
Θεματικοί όροι: горячее прессование, карбид циркония, нитрид циркония, наноиндентирование, керамика
Περιγραφή αρχείου: application/pdf
Σύνδεσμος πρόσβασης: https://vital.lib.tsu.ru/vital/access/manager/Repository/koha:001000122
-
10Academic Journal
Συγγραφείς: С. В. Константинов, Ф. Ф. Комаров, И. В. Чижов, В. А. Зайков, S. V. Konstantinov, F. F. Komarov, I. V. Chizhov, V. A. Zaikov
Πηγή: Proceedings of the National Academy of Sciences of Belarus. Physics and Mathematics Series; Том 59, № 3 (2023); 241-252 ; Известия Национальной академии наук Беларуси. Серия физико-математических наук; Том 59, № 3 (2023); 241-252 ; 2524-2415 ; 1561-2430 ; 10.29235/1561-2430-2023-59-3
Θεματικοί όροι: наноструктурированные покрытия TiAlSiN и TiAlSiCN, структурно-фазовое состояние, наноиндентирование, модуль Юнга, индекс ударной вязкости H/E, индекс сопротивления пластической деформации H 3 /E* 2, TiAlSiN and TiAlSiCN nanostructured coatings, structural phase state, nanoindentation, Young’s modulus, impact strength index H/E, plastic deformation resistance index H 3 /E* 2
Περιγραφή αρχείου: application/pdf
Relation: https://vestifm.belnauka.by/jour/article/view/734/579; Витязь, П. А. Наноматериаловедение / П. А. Витязь, Н. А. Свидунович, Д. В. Куис. – Минск: Высш. шк., 2015. – 511 с.; Effects of Proton Irradiation on the Structural-Phase State of Nanostructured TiZrSiN Coatings and Their Mechanical Properties / F. F. Komarov [et al.] // J. Eng. Phys. Thermophys. – 2021. – Vol. 94, № 6. – P. 1609–1618. doi:10.1007/s10891-021-02442-2; Controllable high adhesion and low friction coefficient in TiAlCN coatings by tuning the C/N ratio / X. Li [et al.] // Appl. Surf. Sci. – 2022. – Vol. 597. – P. 153542. doi:10.1016/j.apsusc.2022.153542; Residual stresses and tribomechanical behaviour of TiAlN and TiAlCN monolayer and multilayer coatings by DCMS and HiPIMS / W. Tillmann [et. al.] // Surf. Coat. Technol. – 2021. – Vol. 406. – P. 126664. doi:10.1016/j.surfcoat.2020.126664; Structure and Mechanical Properties of TiAlN Coatings under High-Temperature Ar+ Ion Irradiation / F. F. Komarov [et al.] // Acta Phys. Pol. A. – 2022. – Vol. 142, № 6. – P. 690–696. doi:10.12693/aphyspola.142.690; Wear resistance and radiation tolerance of He+-irradiated magnetron sputtered TiAlN coatings / S. V. Konstantinov [et al.] // High Temp. Mater. Proc. – 2014. – Vol. 18, № 1–2. – P. 135–141. doi:10.1615/HighTempMatProc.2015015569; Nanostructured Coatings / eds. by A. Cavaleiro, J. T. M. De Hosson. – Springer: New York, 2006. – 648 p. doi:10.1007/978-0-387-48756-4; Veprek, S. A concept for the design of novel superhard coatings / S. Veprek, S. Reiprich // Thin Solid Films. – 1995. – Vol. 268. – Р. 64–71. doi:10.1016/0040-6090(95)06695-0; Superhard nanocrystalline W2N/amorphous Si3N4 composite materials / S. Veprek, M. Haussmann, S. Reiprich // J. Vac. Sci. Technol. A. – 1996. – Vol. 14, № 1. – Р. 46–51. doi:10.1116/1.579878; The search for novel, superhard materials / S. Veprek // J. Vac. Sci. Technol. A. – 1999. – Vol. 17, № 5. – Р. 2401–2420. doi:10.1116/1.581977; Towards the understanding of mechanical properties of super- and ultrahard nanocomposites / S. Veprek, A. S. Argon // J. Vac. Sci. Technol. B. – 2002. – Vol. 20, № 2. – P. 650–664. doi:10.1116/1.1459722; Different approaches to superhard coatings and nanocomposites / S. Veprek [et al.] // Thin Solid Films. – 2005. – Vol. 476, № 1. – Р. 1–29. doi:10.1016/j.tsf.2004.10.053; Многокомпонентные нанокомпозитные покрытия с адаптивным поведением в поверхностной инженерии / А. Д. Погребняк [и др.] // Успехи физ. наук. – 2017. – Т. 187, № 6. – С 629–652. doi:10.3367/UFNr.2016.12.038018; Effects of Si addition on structure and mechanical properties of TiAlSiCN coatings / X. Zhang [et al.] // Surf. Coat. Technol. – 2019. – Vol. 362. – P. 21–26. doi:10.1016/j.surfcoat.2019.01.056; A review on analysis and development of solar flat plate collector / K. M. Pandey, R. Chaurasiya // Renew. Sustain. Energy Rev. – 2017. – Vol. 67. – P. 641–650. doi:10.1016/j.rser.2016.09.078; Understanding the wear failure mechanism of TiAlSiCN nanocomposite coating at evaluated temperatures / F. Guo [et al.] // Trib. Int. – 2021. – Vol. 154. – P. 106716. doi:10.1016/j.triboint.2020.106716; Multilayer SiBCN/TiAlSiCN and AlOx/TiAlSiCN coatings with high thermal stability and oxidation resistance / M. Golizadeh [et al.] // Surf. Coat. Technol. – 2017. – Vol. 319. – P. 277–285. doi:10.1016/j.surfcoat.2017.04.016; Structural transformations in TiAlSiCN coatings in the temperature range 900–1600 °C / K. A. Kuptsov [et al.] // Acta Mater. – 2015. – Vol. 83. – P. 408–418. doi:10.1016/j.actamat.2014.10.007; Measurement of high temperature emissivity and photothermal conversion efficiency of TiAlC/TiAlCN/TiAlSiCN/TiAlSiCO/TiAlSiO spectrally selective coating / J. Jyothi [et al.] // Sol. Energy Mater. Solar Cells. – 2017. – Vol. 171. – P. 123–130. doi:10.1016/j.solmat.2017.06.057; Комаров, Ф. Ф. Влияние условий нанесения наноструктурированных покрытий из Ti–Zr–Si–N на их состав, структуру и трибомеханические свойства / Ф. Ф. Комаров, В. В. Пилько, И. М. Климович // Инженер.-физ. журн. – 2015. – Т. 88, №. 2. – C. 350–354.; Система контроля расхода газов для применения в технологии реактивного магнетронного распыления / И. М. Климович [и др.] // Приборы и методы измерений. – 2015. – Т. 6, № 2. – С. 139–147.; Структурно-фазовые состояния и микромеханические свойства наноструктурированных покрытий TiAlCuN / С. В. Константинов [и др.] // Докл. Нац. акад. наук Беларуси. – 2023. – Т. 67, № 2. – С. 101–110. doi:10.29235/1561-8323-2023-67-2-101-110; Oliver, W. C. Measurement of hardness and elastic modulus by instrumented indentation: Advances in understanding and refinements to methodology / W. C. Oliver, G. M. Pharr // J. Mater. Res. – 2004. – Vol. 19, № 1. – P. 3–20. doi:10.1557/jmr.2004.19.1.3; Konstantinov, S. V. Effects of nitrogen selective sputtering and flaking of nanostructured coatings TiN, TiAlN, TiAlYN, TiCrN, (TiHfZrVNb)N under helium ion irradiation / S. V. Konstantinov, F. F. Komarov // Acta Phys. Pol. A. – 2019. – Vol. 136, № 2. – P. 303–309. doi:10.12693/APhysPolA.136.303; Самсонов, Г. В. Тугоплавкие соединения / Г. В. Самсонов, И. М. Виницкий. – 2-е изд. – М.: Металлургия, 1976. – 560 с.; Комаров, Ф. Ф. Радиационная стойкость наноструктурированных покрытий TiN, TiAlN, TiAlYN / Ф. Ф. Комаров, С. В. Константинов, В. Е. Стрельницкий // Докл. Нац. акад. наук Беларуси. – 2014. – Т. 58, № 6. – С. 22–27.; Optical properties of TiAlC/TiAlCN/TiAlSiCN/TiAlSiCO/TiAlSiO tandem absorber coatings by phase-modulated spectroscopic ellipsometry / J. Jyothi, A. Biswas, P. Sarkar // Appl. Phys. A. – 2017. – Vol. 123, № 7. – P. 496. doi:10.1007/s00339-017-1103-2; Radiation tolerance of nanostructured TiAlN coatings under Ar+ ion irradiation / S. V. Konstantinov [et al.] // Surf. Coat. Technol. – 2020. – Vol. 386. – P. 125493. doi:10.1016/j.surfcoat.2020.125493; Leyland, А. Design criteria for wear-resistant nanostructured and glassy-metal coatings / A. Leyland, A. Matthews // Surf. Coat. Technol. – 2004. – Vol. 177–178. – P. 317–324. doi:10.1016/j.surfcoat.2003.09.011; Musil, J. Hard nanocomposite coatings: Thermal stability, oxidation resistance and toughness / J. Musil // Surf. Coat. Technol. – 2012. – Vol. 207. – P. 50–65. doi:10.1016/j.surfcoat.2012.05.073; Структура и механические свойства наноструктурированных нитридных и карбонитридных покрытий TiAlCuN, TiAlCuCN / С. В. Константинов [и др.] // Порошковая металлургия: инженерия поверхности, новые композиционные материалы. сварка : сб. докл. 13-го Междунар. симп. (Минск, 5–7 апр. 2023 г.). – Минск, 2023. – Ч. 2. – С. 283–290.; https://vestifm.belnauka.by/jour/article/view/734
-
11Conference
Συγγραφείς: Волкова, Анастасия Петровна, Храпов, Дмитрий, Грубова, Ирина Юрьевна
Συνεισφορές: Сурменева, Мария Александровна
Θεματικοί όροι: модифицированные поверхности, импульсные пучки, электронные пучки, электронно-лучевые технологии, микроструктуры, шероховатость, титановые сплавы, наноиндентирование, биомедицинские сплавы
Περιγραφή αρχείου: application/pdf
Relation: Перспективы развития фундаментальных наук : сборник научных трудов XVIII Международной конференции студентов, аспирантов и молодых ученых, г. Томск, 27-30 апреля 2021 г. Т. 1 : Физика. — Томск, 2021; http://earchive.tpu.ru/handle/11683/68348
Διαθεσιμότητα: http://earchive.tpu.ru/handle/11683/68348
-
12Conference
Συνεισφορές: Сурменева, Мария Александровна
Θεματικοί όροι: импульсные пучки, биомедицинские сплавы, электронно-лучевые технологии, модифицированные поверхности, шероховатость, титановые сплавы, наноиндентирование, электронные пучки, микроструктуры
Περιγραφή αρχείου: application/pdf
Σύνδεσμος πρόσβασης: http://earchive.tpu.ru/handle/11683/68348
-
13Conference
Συγγραφείς: Moskvina, V. A., Zagibalova, E. A., Ramazanov, K. N.
Συνεισφορές: Астафурова, Е. Г.
Θεματικοί όροι: ИОННО-ПЛАЗМЕННАЯ ОБРАБОТКА, ION-PLASMA TREATMENT, GRAIN SIZE, AUSTENITIC STAINLESS STEEL, МЕХАНИЧЕСКИЕ СВОЙСТВА, НАНОИНДЕНТИРОВАНИЕ, АУСТЕНИТНАЯ НЕРЖАВЕЮЩАЯ СТАЛЬ, NANOINDENTATION, MECHANICAL PROPERTIES, РАЗМЕР ЗЕРНА
Περιγραφή αρχείου: application/pdf
Σύνδεσμος πρόσβασης: http://elar.urfu.ru/handle/10995/97030
-
14Report
Συγγραφείς: Гао, Юйчэнь
Συνεισφορές: Матренин, Сергей Вениаминович
Θεματικοί όροι: сверхвысокочастотное излучение, горячее пресование, нанопорошок, наночастица, наноиндентирование, ultrahigh frequency radiation, hot pressing, nanopowder, nanoparticle, nanoindentation, 669.713:621.762:539.06
Περιγραφή αρχείου: application/pdf
Διαθεσιμότητα: http://earchive.tpu.ru/handle/11683/75273
-
15Academic Journal
Συγγραφείς: V. A. Lapitskaya, T. A. Kuznetsova, S. A. Chizhik, B. Warcholinski, В. А. Лапицкая, Т. А. Кузнецова, С. А. Чижик, Б. Вархолински
Συνεισφορές: This research was supported by the grant of Belarusian Republican Foundation for Fundamental Research BRFFR No. F20M-083 and Т21МS-029, as part of the assignment No. 2.3 SPSR “Energy and nuclear processes and technologies”
Πηγή: Devices and Methods of Measurements; Том 13, № 1 (2022); 40-49 ; Приборы и методы измерений; Том 13, № 1 (2022); 40-49 ; 2414-0473 ; 2220-9506 ; 10.21122/2220-9506-2022-13-1
Θεματικοί όροι: наноиндентирование, accuracy, indentation method, atomic force microscopy, nanoindentation, точность, метод индентирования, атомно-силовая микроскопия
Περιγραφή αρχείου: application/pdf
Relation: https://pimi.bntu.by/jour/article/view/748/614; Gdoutos E.E. Fracture Mechanics. Cham: Springer, 2020, vol. XIX, 477 p. DOI:10.1007/1-4020-3153-X; Ritchie R., Liu D. Introduction to Fracture Mechanics. 1st Edition. Elsevier, 2021, 160 p. DOI:10.1016/C2020-0-03038-0; Moradkhani A., Baharvandi H., Tajdari M., Latifi H., Martikainen J. Determination of fracture toughness using the area of micro-crack tracks left in brittle materials by Vickers indentation test. Journal of Advanced Ceramics, 2013, vol. 2(1), pp. 87–102. DOI:10.1007/s40145-013-0047-z; Evans A.G. Fracture Toughness Determinations by Indentation. Journal of the American Ceramic Society, 1976, vol. 59, pp. 371–372. DOI:10.1111/j.1151-2916.1976.tb10991.x; Niihara K., Morena R., Hasselman D.P.H. Evaluation of KIC of brittle solids by the indentation method with low crack-to-indent ratios. Journal of Materials Science Letters, 1982, vol. 1, pp. 13–16. DOI:10.1007/BF00724706; Niihara K. A fracture mechanics analysis of indentation-induced Palmqvist crack in ceramics. Journal of Materials Science Letters, 1983, vol. 2, pp. 221–223. DOI:10.1007/BF00725625; Grinchuk P.S., Kiyashko M.V., Abuhimd H.M., Alshahrani M.S., Stepkin M.O., Toropov V.V., Khort A.A., Solovei D.V., Akulich A.V., Shashkov M.D., Liakh M.Yu. Effect of technological parameters on densification of reaction bonded Si/SiC ceramics. Journal of the European Ceramic Society, 2018, vol. 38, pp. 4815–4823. DOI:10.1016/j.jeurceramsoc.2018.07.014; Grinchuk P.S., Kiyashko M.V., Abuhimd H.M., Alshahrani M.S., Solovei D.V., Stepkin M.O., Akulich A.V., Shashkov M.D., Kuznetsova T.A., DanilovaTretiak S.M., Evseeva L.E., Nikolaeva K.V. Advanced technology for fabrication of reaction-bonded SiC with controlled composition and properties. Journal of the European Ceramic Society, 2021, vol. 41, pp. 5813–5824. DOI:10.1016/j.jeurceramsoc.2021.05.017; Scholz T., Schneider G.A., Muñoz-Saldaña J., Swain M.V. Fracture toughness from submicron derived indentation cracks. Applied Physics Letters, 2004, vol. 84, pp. 3055. DOI:10.1063/1.1711164; Sergejev F. Comparative study on indentation fracture toughness measurements of cermets and hardmetals. Estonian Journal of Engineering, 2006, vol. 12(4), pp. 43–48. DOI:10.3176/eng.2006.4.07; Lapitskaya V.A., Kuznetsova T.A., Khabarava A.V., Chizhik S.A., Aizikovich S.M., Sadyrin E.V., Mitrin B.I., Sun Weifu. The use of AFM in assessing the crack resistance of silicon wafers of various orientations. Engineering Fracture Mechanics, 2022, vol. 259, pp. 107926. DOI:10.1016/j.engfracmech.2021.107926; Pogotskaia I.V., Kuznetsova T.A., Chizhik S.A. Elastic Modulus Determination of Nanolayers by the Atomic-Force Microscopy Method. Mekhanika mashin, mekhanizmov i materialov [Mechanics of Machines, Mechanisms and Materials], 2011, no. 3(16), pp. 43–48 (in Russian).; Oreshko E.I., Utkin D.A., Erasov V.S., Lyakhov A.A. Methods of measurement of hardness of materials (review). Trudy VIAM [Proceedings of VIAM], 2020, no. 1(85), pp. 101–117 (in Russian). DOI:10.18577/2307-6046-2020-0-1-101-117; Oliver W.C., Pharr G.M. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments. Journal of Materials Research, 1992, vol. 7, pp. 1564–1583. DOI:10.1557/JMR.1992.1564; Lapitskaya V.A., Kuznetsova T.A., Khudoley A.L., Khabarava A.V., Chizhik S.A., Aizikovich S.M., Sadyrin E.V. Influence of polishing technique on crack resistance of quartz plates. International Journal of Fracture, 2021, vol. 231, no. 1, pp. 61–77. DOI:10.1007/s10704-021-00564-5; https://pimi.bntu.by/jour/article/view/748
-
16Academic Journal
Πηγή: Известия высших учебных заведений. Физика. 2022. Т. 65, № 12. С. 146-148
Θεματικοί όροι: акустические свойства древесины, модули потерь, наноиндентирование, модули упругости
Περιγραφή αρχείου: application/pdf
Σύνδεσμος πρόσβασης: https://vital.lib.tsu.ru/vital/access/manager/Repository/koha:000927639
-
17Academic Journal
Συγγραφείς: S. V. Konstantinov, F. F. Komarov, V. E. Strel’nitskij, С. В. Константинов, Ф. Ф. Комаров, В. Е. Стрельницкий
Πηγή: Doklady of the National Academy of Sciences of Belarus; Том 65, № 4 (2021); 412-421 ; Доклады Национальной академии наук Беларуси; Том 65, № 4 (2021); 412-421 ; 2524-2431 ; 1561-8323 ; 10.29235/1561-8323-2021-65-4
Θεματικοί όροι: радиационная стойкость, structural-phase state, tribomechanical properties, nanoindentation, radiation tolerance, структурно-фазовое состояние, трибомеханические свойства, наноиндентирование
Περιγραφή αρχείου: application/pdf
Relation: https://doklady.belnauka.by/jour/article/view/988/985; Lattice expansion and microstructure evaluation of Ar ion-irradiated titanium nitride / J. X. Xue [et al.] // Nuclear Instruments and Methods in Physics Research B. – 2013. – Vol. 308. – P. 62–67. https://doi.org/10.1016/j.nimb.2013.05.011; Andrievskii, R. А. Radiation Stability of Nanomaterials / R. А. Andrievskii // Nanotechnologies in Russia. – 2011. – Vol. 6, N 5–6. – P. 357–369. https://doi.org/10.1134/s1995078011030037; Андриевский, Р. А. Наноструктуры в экстремальных условиях / Р. А. Андриевский // Успехи физ. наук. – 2014. – Т. 184, № 10. – С. 1017–1032. https://doi.org/10.3367/ufnr.0184.201410a.1017; Shen, T. D. Radiation tolerance in a nanostructure: Is smaller better? / T. D. Shen // Nuclear Instruments and Methods in Physics Research B. – 2008. – Vol. 266, N 10. – P. 921–925. https://doi.org/10.1016/j.nimb.2008.01.039; Microstructural design of hard coatings / P. H. Mayrhofer [et al.] // Progress in Materials Science. – 2006. – Vol. 51, N 8. – P. 1032–1114. https://doi.org/10.1016/j.pmatsci.2006.02.002; Milosev, I. Comparison of TiN, ZrN and CrN hard nitride coatings: electrochemical and thermal oxidation / I. Milosev, H.-H. Strehbtow, B. Navinsek // Thin Solid Films. – 1997. – Vol. 303, N 1–2. – P. 246–254. https://doi.org/10.1016/s0040-6090(97)00069-2; Otani, Y. High temperature oxidation behaviour of (Ti1−xCrx)N coatings / Y. Otani, S. Hofmann // Thin Solid Films. – 1996. – Vol. 287, N 1–2. – P. 188–192. https://doi.org/10.1016/s0040-6090(96)08789-5; Stress and mechanical properties of Ti–Cr–N gradient coatings deposited by vacuum arc / V. V. Uglov [et al.] // Surface and Coatings Technology. – 2005. – Vol. 200, N 1–4. – P. 178–181. https://doi.org/10.1016/j.surfcoat.2005.02.136; Akbarzadeh, M. Characterization of TiN, CrN and (Ti, Cr)N Coatings Deposited by Cathodic ARC Evaporation / M. Akbarzadeh, A. Shafyei, H. R. Salimijazi // International Journal of Engineering Transactions A: Basics. – 2014. – Vol. 27, N 7. – P. 1127–1132.; Твердые покрытия Ti–Al–N, осажденные из фильтрованной вакуумно-дуговой плазмы / В. А. Белоус [и др.] // Физическая инженерия поверхности. – 2009. – Т. 7, № 3. – С. 216–222.; The effect of steel substrate pre-hardening on structural, mechanical, and tribological properties of magnetron sputtered TiN and TiAlN coatings / F. F. Komarov [et al.] // Wear. – 2016. – Vol. 352–353. – P. 92–101. https://doi.org/10.1016/j.wear.2016.02.007; Nanostructured Coatings / eds. A Cavaleiro, J. T. de Hosson. – Berlin, 2006. – 648 p. https://doi.org/10.1007/0-387-48756-5; Hultman, L. Thermal stability of nitride thin films / L. Hultman // Vacuum. – 2000. – Vol. 57, N 1. – P. 1–30. https://doi.org/10.1016/s0042-207x(00)00143-3; Самсонов, Г. В. Тугоплавкие соединения / Г. В. Самсонов, И. М. Виницкий. 2-е изд. – М., 1976. – 560 с.; Русаков, А. А. Рентгенография металлов / А. А. Русаков. – М., 1977. – 480 с.; Комаров, Ф. Ф. Радиационная стойкость наноструктурированных покрытий TiN, TiAlN, TiAlYN / Ф. Ф. Комаров, С. В. Константинов, В. Е. Стрельницкий // Докл. Нац. акад. наук Беларуси. – 2014. – Т. 58, № 6. – С. 22–27.; Komarov, F. F. Radiation Resistance of high-entropy nanostructured (Ti, Hf, Zr, V, Nb)N coatings / F. F. Komarov, A. D. Pogrebnyak, S. V. Konstantinov // Technical Physics. – 2015. – Vol. 60, N 10. – P. 1519–1524. https://doi.org/10.1134/s1063784215100187; Влияние облучения ионами гелия на структуру, фазовую стабильность и микротвердость наноструктурированных покрытий TiN, TiAlN, TiAlYN / Ф. Ф. Комаров [и др.] // Журн. техн. физики. – 2016. – Т. 86, № 5. – С. 57–63.; Ziegler, J. F. The Stopping and Range of Ions in Solids / J. F. Ziegler, J. P. Biersack, U. Littmark. – New York, 1985.; The effect of He and swift heavy ions on nanocrystalline zirconium nitride / J. A. van Vuuren [et al.] // Nuclear Instruments and Methods in Physics Research B. – 2014. – Vol. 326. – P. 19–22. https://doi.org/10.1016/j.nimb.2013.10.063; Yang, Y. Radiation stability of ZrN under 2.6 MeV proton irradiation / Y. Yang, C. A. Dickerson, T. R. Allen // Journal of Nuclear Materials. – 2009. – Vol. 392, N 2. – P. 200–205. https://doi.org/10.1016/j.jnucmat.2009.03.040; Enhanced radiation tolerance in nanocrystalline MgGa2O4 / T. D. Shen [et al.] // Applied Physics Letters. – 2007. – Vol. 90, N 26. – P. 263115. https://doi.org/10.1063/1.2753098; Enhanced radiation tolerance in nitride multilayered nanofilms with small period-thicknesses / M. Hong [et al.] // Applied Physics Letters. – 2012. – Vol. 101, N 15. – P. 153117. https://doi.org/10.1063/1.4759004; Relation between microstructure and hardness of nano-composite CrN/Si3N4 coatings obtained using CrSi single target magnetron system / J. Morgiel [et al.] // Vacuum. – 2013. – Vol. 90. – P. 170–175. https://doi.org/10.1016/j.vacuum.2012.03.043; Musil, J. Hard and superhard nanocomposite coatings / J. Musil // Surface and Coatings Technology. – 2000. – Vol. 125, N 1–3. – P. 322–330. https://doi.org/10.1016/s0257-8972(99)00586-1; https://doklady.belnauka.by/jour/article/view/988
-
18Report
Συγγραφείς: Ли, Цзе
Συνεισφορές: Матренин, Сергей Вениаминович
Θεματικοί όροι: структура, физико-механические свойства, горячее прессование, наноиндентирование, карбонитриды, structure, physical and mechanical properties, hot pressing, nanoindentation, carbonitrides, 22.03.01, 666.3.017
Περιγραφή αρχείου: application/pdf
Διαθεσιμότητα: http://earchive.tpu.ru/handle/11683/71983
-
19Academic Journal
Συγγραφείς: ГРАБКО, Д., ШИКИМАКА, О., ПЫРЦАК, К., БАРБОС, З., ПОПА, М., ПРИСАКАРУ, А., ВИЛОТИЧ, Д., ВИЛОТИЧ, М., АЛЕКСАНДРОВ, С.
Θεματικοί όροι: нержавеющая сталь, сталь, наноиндентирование, микроиндентирование, пластическая деформация
Περιγραφή αρχείου: application/pdf
-
20Academic Journal
Συγγραφείς: F. F. Komarov, S. V. Konstantinov, V. A. Zaikov, V. V. Pilko, Ф. Ф. Комаров, С. В. Константинов, В. А. Зайков, В. В. Пилько
Πηγή: Doklady of the National Academy of Sciences of Belarus; Том 64, № 5 (2020); 534-543 ; Доклады Национальной академии наук Беларуси; Том 64, № 5 (2020); 534-543 ; 2524-2431 ; 1561-8323 ; 10.29235/1561-8323-2020-64-5
Θεματικοί όροι: радиационная стойкость, structural-phase state, tribomechanical properties, nanoindentation, radiation tolerance, структурно-фазовое состояние, трибомеханические свойства, наноиндентирование
Περιγραφή αρχείου: application/pdf
Relation: https://doklady.belnauka.by/jour/article/view/911/908; Белоус, А. И. Космическая электроника / А. И. Белоус, В. А. Солодуха, С. В. Шведов. - М., 2015. - Т. 1. - 696 с.; Гущин, В. Н. Основы устройства космических аппаратов. - М., 2003. - 272 с.; Комаров, Ф. Ф. Влияние условий нанесения наноструктурированных покрытий из Ti-Zr-Si-N на их состав, структуру и трибомеханические свойства / Ф. Ф. Комаров, В. В. Пилько, И. М. Климович // Инженерно-физ. журн. -2015. - Т. 88, № 2. - C. 350-354.; Система контроля расхода газов для применения в технологии реактивного магнетронного распыления / И. М. Климович [и др.] // Приборы и методы измерений. - 2015. - Т. 6, № 2. - С. 139-147.; Powder diffraction file. Alphabetical index inorganic compounds / ed. W. Frank. - Pennsylvania, 1977. - 859 p.; Oliver, W. C. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments / W. C. Oliver, G. M. Pharr // J. Mater. Res. - 1992. - Vol. 7, N 6. - P. 1564-1583. https://doi.org/10.1557/jmr.1992.1564; Oliver, W. C. Measurement of hardness and elastic modulus by instrumented indentation: Advances in understanding and refinements to methodology / W. C. Oliver, G. M. Pharr // J. Mater. Res. - 2004. - Vol. 19, N 1. - P. 3-20. https://doi.org/10.1557/jmr.2004.19.1.3; Износостойкие покрытия Ti-Al-Si-C-N, полученные методом магнетронного распыления СВС-мишеней / Ф. В. Кирюханцев-Корнеев [и др.] // Изв. вузов. Порошковая металлургия и функциональные покрытия. - 2011. -№ 3. - С. 22-27.; Горелик, С. С. Рентгенографический и электронно-оптический анализ / С. С. Горелик, Ю. А. Скаков, Л. Н. Расторгуев. - 3-е изд., доп. и перераб. - М., 1994. - 328 с.; Structure and hardness of quaternary TiZrSiN thin films deposited by reactive magnetron co-sputtering / I. A. Saladukhin [et al.] // Thin Solid Films. - 2015. - Vol. 581. - P. 25-31. https://doi.org/10.1016/j.tsf.2014.11.020; Thermal stability of nanostructured TiZrSiN thin films subjected to helium ion irradiation / V. V. Uglov [et al.] // Nucl. Instrum. Methods Phys. Res., Sect. B. - 2015. - Vol. 354. - P. 264-268.; Русаков, А. А. Рентгенография металлов / А. А. Русаков. - М., 1977. - 480 с; Nanostructured Coatings / eds. A. Cavaleiro, J. T. M. De Hosson. - Berlin, 2006. https://doi.org/10.1007/978-0-387-48756-4; The effect of steel substrate pre-hardening on structural, mechanical, and tribological properties of magnetron sputtered TiN and TiAlN coatings / F. F. Komarov [et al.] // Wear. - 2016. - Vol. 352-353. - P. 92-101. https://doi.org/10.1016/j.wear.2016.02.007; https://doklady.belnauka.by/jour/article/view/911